Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Chevrolet G30 VAN car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Chevrolet G30 VAN automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Chevrolet G30 VAN
- 1997 Chevrolet G30 VAN Express 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 1997 Chevrolet G30 VAN Express 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:F
- 1997 Chevrolet G30 VAN Express 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet G30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet G30 VAN cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Description
Vehicle: 1997 Chevrolet G30 VAN Express 5.7 V8 GAS
The caliper assembly slides on its mounting surfaces, Fig. . Upon brake application, hydraulic pressure against the piston forces the inboard pad against the inboar...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet G30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet G30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet G30 VAN cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 1997 Chevrolet G30 VAN Express 5.7 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in the bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect ...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet G30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet G30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet G30 VAN cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Astro, Bravada, S & T Series & Safari -> Aztek -> C & K Series -> Duo-Servo -> G Series -> Installation -> Montana, Silhouette, Trans Sport & Venture -> P Series -> Removal -> Single-Servo -> Tracker
Vehicle: 1997 Chevrolet G30 VAN Express 7.4 V8 GAS
C & K Series
Duo-Servo
Removal
- Raise and support vehicle.
- Mark relationship of wheel to hub, then remove tire and wheel assembly.
- On models equipped with full-floating axles, remove hub and drum assembly as described in "Drive Axles."
- On models equipped with semi-floating axles, proceed as follows:
- Install pin into park brake lever.
- Mark relationship of drum to axle.
- Remove rear brake drum retainers, as required.
- Remove rear brake drum.
- On all models, remove return springs and shoe guide, Fig. .
- Remove brake hold down springs and pins.
- Disconnect actuator lever and pivot.
- Remove lever return spri...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet G30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet G30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet G30 VAN cars and light trucks from 1990+.
Anti-lock Brakes -> Kelsey-Hayes -> Description
Vehicle: 1997 Chevrolet G30 VAN Express 6.5 V8 DIESEL
This system is used on all models except Montana, Silhouette, Tracker, Trans Sport and Venture. On 2000 S & T Series , four door utility vehicles can be equipped with either a 310 or 325 ABS system. Pickups and two-door utility vehicles are equipped with 310 ABS systems. While both systems are functionally the same, the 310 differs in size and appearance from the 325. It is designed to reduce the occurrence of wheel lock-up during severe braking conditions. To accomplish this function, the system regulates hydraulic brake line pressure by using an Electro-Hydraulic Control Unit (EHC...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet G30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet G30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet G30 VAN cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Rotor Replacement -> 2WD Models -> 4WD Models -> Astro, Blazer, Bravada, Jimmy, K1500/2500 & T Series Pickup -> Except Montana, Silhouette, Trans Sport & Venture -> Front -> K3500 -> Montana, Silhouette, Trans Sport & Venture -> Rear
Vehicle: 1997 Chevrolet G30 VAN Express 5.7 V8 GAS
2WD Models
Except Montana, Silhouette, Trans Sport & Venture
Front
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove caliper as outlined under "Caliper Service."
- Remove grease cap from hub/rotor, Fig. .
- Remove cotter pin, nut and washer.
- Remove hub/rotor from spindle, being careful not to damage spindle threads or outer bearing.
- Reverse procedure to install, noting the following:
- Apply high-temperature wheel bearing grease to inner and outer wheel bearings.
- Torque nut to 12 ft. lbs. while turning wheel assembly forward by hand, back nut off one flat or until hole in spindle...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet G30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet G30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet G30 VAN cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Tightening Specifications
Vehicle: 1997 Chevrolet G30 VAN Express 6.5 V8 DIESEL
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet G30 VAN BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
