Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Chevrolet Monte Carlo car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Chevrolet Monte Carlo automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Chevrolet Monte Carlo
- 1997 Chevrolet Monte Carlo LS 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
- 1997 Chevrolet Monte Carlo Z34 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:X
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet Monte Carlo cars and light trucks from 1990+.
Anti-Lock Brakes -> Delphi (Delco-Moraine) Type VI -> PRECAUTIONS -> ABS Service
Vehicle: 1997 Chevrolet Monte Carlo Z34 3.4 V6 GAS
ABS Service
Before performing any repairs on the ABS system, note the following precautions:
- Before using electric welding equipment, disconnect EBTCM.
- Carefully note routing, position and mounting ABS and TCS wiring, connectors, clips and brackets. ABS and TCS are extremely sensitive to electromagnetic interference.
- Do not use a fast charger when battery is connected. Never disconnect battery from system with engine running.
- Ignition switch must be in Off position when disconnecting EBTCM.
- Many ABS system components...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet Monte Carlo cars and light trucks from 1990+.
Anti-Lock Brakes -> Delphi (Delco-Moraine) Type VI -> SYSTEM SERVICE -> 1997 -> 1998 -> Achieva, Beretta, Cavalier, Corsica, Cutlass Supreme, Grand Am, Grand Prix, Lumina, Malibu, Metro, Monte Carlo, Prizm, Regal & Sunfire -> Achieva, Beretta, Corsica, Grand Am & Skylark -> Achieva, Cutlass, Cutlass Supreme, Grand Am, Grand Prix, Lumina, Malibu, Monte Carlo, Regal & Skylark, 1998 Cavalier & Sunfire -> Beretta, Corsica & 1997 Cavalier & Sunfire -> Brake System Bleed -> Camaro & Firebird -> Cavalier & Sunfire -> Component Replacement -> Cutlass & Malibu -> Cutlass Supreme, Grand Prix, Intrigue, Lumina, Monte Carlo, Regal & 1997-98 Century -> Electronic Brake Control Module -> Front -> Hydraulic Modulator Assembly -> Hydraulic Modulator Solenoid -> Hydraulic System Flush -> Less Scan Tool -> Manual Bleed -> Manual Flush -> Metro -> Pressure Bleed -> Pressure Flush -> Prizm -> Rear -> Rehome -> Scan Tool -> Wheel Speed Sensor
Vehicle: 1997 Chevrolet Monte Carlo Z34 3.4 V6 GAS
Brake System Bleed
Before bleeding the brakes, the front and rear displacement cylinder pistons must be returned to their top most position as outlined under "Rehome."
Rehome
Scan Tool
All Diagnostic Trouble Codes (DTCs) must be repaired and cleared before attempting to rehome displacement cylinder pistons. Using suitably programmed scan tool, follow tool manufacturers instructions.
Less Scan Tool
On 1997-98 models, refer to " Scan Tool."
ABS warning lamp must not be illuminated. Do not place foot on brake pedal unless specifically directed to do so.
- Remove foot from brake pedal.
- Start engine...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet Monte Carlo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Brake Pad Service
Vehicle: 1997 Chevrolet Monte Carlo LS 3.1 V6 GAS
- Remove 2/3 of brake fluid from master cylinder reservoir.
- Raise and support vehicle.
- Mark relationship of wheel to axle flange, then remove wheel and tire assembly.
- Remove bolt and washer attaching cable support bracket to caliper body, Fig. .
- Remove sleeve bolt and pivot caliper assembly up, Fig. . Do not completely remove caliper assembly body.
- Remove outboard and inboard shoe and linings, then two pad clips from caliper support.
- Using a suitable spanner type tool in piston slots, turn piston assembly and thread it into caliper body assembly.
- After bottoming piston, lift inner edge...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet Monte Carlo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Description
Vehicle: 1997 Chevrolet Monte Carlo LS 3.1 V6 GAS
The caliper assembly, Fig. , has a single bore and is mounted to the support bracket with two mounting bolt and sleeve assemblies. Hydraulic pressure created by applying the brake pedal, is converted by the caliper to a stopping force. This force acts equally against the piston and the bottom of the piston bore to move the piston outward and to slide the caliper inward resulting in a clamping action. This clamping action presses the linings against the rotor, creating friction to stop the vehicle.
When the parking brake is applied, the external caliper parking brake lever moves and r...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet Monte Carlo cars and light trucks from 1990+.
Anti-Lock Brakes -> Delphi (Delco-Moraine) Type VI -> TROUBLESHOOTING
Vehicle: 1997 Chevrolet Monte Carlo LS 3.1 V6 GAS
Connector numbers, circuit numbers and wire...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet Monte Carlo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Dual Piston Front Disc Brake -> Rotor, Replace
Vehicle: 1997 Chevrolet Monte Carlo LS 3.1 V6 GAS
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove caliper and caliper mounting b...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Chevrolet Monte Carlo vehicle.
|
| Access the Complete guide! |
