Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Chevrolet S10 Pickup car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Chevrolet S10 Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Chevrolet S10 Pickup
- 1997 Chevrolet S10 Pickup 2.2 L4 GAS, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:4
- 1997 Chevrolet S10 Pickup 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 1997 Chevrolet S10 Pickup 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:X
- 1997 Chevrolet S10 Pickup L ELECTRIC, Engine VIN:, Desg:H
A/C & HEATER SERVICE PROCEDURES FOR 1997 Chevrolet S10 Pickup AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1997 Chevrolet S10 Pickup cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Compressor, Replace -> Astro & Safari -> Bravada & S/T Series -> C & K Series -> G & P Series -> Silhouette, Trans Sport, 1996 Lumina APV & 1997 Venture -> Tracker -> V6 Engines
Vehicle: 1997 Chevrolet S10 Pickup L ELECTRIC
Astro & Safari
V6 Engines
- Recover refrigerant as outlined under .
- Remove the engine cover, then disconnect electrical connectors from compressor and clutch.
- Loosen idle pulley and disconnect compressor drive belt.
- Remove compressor manifold attaching bolt and manifold from rear of compressor, then cap all connections.
- Remove carburetor vacuum break to provide clearance, if necessary.
- Remove bolts securing compressor to mounting bracket, then compressor, Fig. .
- Reverse procedure to install, using new O-rings when install...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet S10 Pickup A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1997 Chevrolet S10 Pickup AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1997 Chevrolet S10 Pickup cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Thermostat, Replace -> Astro, Bravada, Safari & S/T Series -> C, G, K & P Series -> Diesel Engine -> Gasoline Engine -> Silhouette, Trans Sport, 1996 Lumina APV & 1997 Venture -> Tracker
Vehicle: 1997 Chevrolet S10 Pickup L ELECTRIC
C, G, K & P Series
Gasoline Engine
- Remove engine cover, air cleaner and air inlet duct, as necessary.
- Drain cooling system into suitable container until radiator coolant level is below thermostat.
- Remove radiator hose at coolant outlet.
- Remove thermostat housing mounting bolts and ground wire, if applicable.
- Remove thermostat housing, thermostat and gasket.
- Reverse procedure to install, noting the following:
- On all models except 7.4L engine, torque attaching bolts to 21 ft. lbs.
- On 7.4L engine, torque att...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet S10 Pickup A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1997 Chevrolet S10 Pickup AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1997 Chevrolet S10 Pickup cars and light trucks from 1990+
General Service Domestic Vehicles -> 1996-97 -> Charging System -> Avenger, Colt, Stealth, Summit & Talon -> Breeze, Cirrus, Concorde, Intrepid, LHS, New Yorker, Sebring, Stratus & Vision -> Cherokee, Dakota, Full Size Pickups & Vans, Grand Cherokee & Wrangler -> DaimlerChrysler Corp. -> Ford Motor Co. -> General Motors -> Minivans -> Neon
Vehicle: 1997 Chevrolet S10 Pickup L ELECTRIC
DaimlerChrysler Corp.
Breeze, Cirrus, Concorde, Intrepid, LHS, New Yorker, Sebring, Stratus & Vision
- Connect suitable pressure gauge or reclaim/recycle equipment to discharge side of compressor, then attach clamp-on thermocouple part No. P.S.E. 66-324-0014, 80PK-1A or equivalent, to liquid line as shown in Fig. It must be attached as close to condenser as possible to read liquid line temperature.
- With transaxle in Park and engine idling at 700 RPM, set air conditioning controls as follows:
- Set A/C control to outside air.
- Set pa...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet S10 Pickup A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1997 Chevrolet S10 Pickup AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1997 Chevrolet S10 Pickup cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Arming -> Light Trucks & Vans -> Passenger Cars
Vehicle: 1997 Chevrolet S10 Pickup 2.2 L4 GAS
Passenger Cars
Reverse disarming procedures to arm the Supplemental Restraint System, noting the following:
- Ensure all disconnected SRS electrical connectors are securely connected and routed.
- Install all removed fuses in proper locations.
- From a safe position at sides of or below air bag module, Turn ignition switch to ON position and observe Air Bag or SRS warning lamp.
- On all models except Prizm and 1990 Corvette, warning lamp should flash seven to nine times, then go off.
- On Prizm models, warning lamp should light for six seconds,...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet S10 Pickup A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1997 Chevrolet S10 Pickup AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1997 Chevrolet S10 Pickup cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Condenser, Replace -> Astro & Safari -> Bravada & S/T Series -> C & K Series -> G Series -> P Series -> Silhouette, Trans Sport, 1996 Lumina APV & 1997 Venture -> Tracker
Vehicle: 1997 Chevrolet S10 Pickup L ELECTRIC
Astro & Safari
- Recover refrigerant as outlined under .
- Remove grille and front end panel.
- Disconnect radiator tie bar support at top.
- Disconnect refrigerant lines from condenser, then cap lines and open fittings.
- Remove condenser.
- Reverse procedure to install.
C & K Series
- Recover refrigerant as outlined under .
- Remove grille assembly.
- Remove condenser inlet and discharge lines, then cap all connections.
- Remove the condenser to radiator support screws, then brackets and upper insulators.
- Remove the co...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet S10 Pickup A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1997 Chevrolet S10 Pickup AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1997 Chevrolet S10 Pickup cars and light trucks from 1990+
Cooling Fans -> Light Duty Trucks & Vans -> Description -> C, K, G & P Series -> Lumina APV, Silhouette, Trans Sport & Venture
Vehicle: 1997 Chevrolet S10 Pickup L ELECTRIC
Lumina APV, Silhouette, Trans Sport & Venture
This fan is driven by an electric motor which is attached to the radiator support. The cooling fan is controlled by the PCM, based on inputs from the coolant temperature sensor, A/C fan control switch and vehicle speed. The PCM controls the fan through a ground circuit, which energizes the fan control relay, supplying voltage to the fan motor.
The PCM grounds the circuit when coolant temperature is over 223°F or when A/C is On.
C, K, G & P ...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet S10 Pickup A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Chevrolet S10 Pickup vehicle.
|
| Access the Complete guide! |
