Auto Parts Search
We have info for following modifications of 1997 GEO Metro
- 1997 GEO Metro 1.0 L3 GAS, CC:993, CID:61, Fuel Injection, Aspiration:61, Engine VIN:, Desg:6
- 1997 GEO Metro LSI 1.3 L4 GAS, CC:1295, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:9
BRAKE SERVICE PROCEDURES FOR 1997 GEO Metro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 GEO Metro cars and light trucks from 1990+.
Disc Brakes -> Aisin-Seiki Single Piston Front Disc Brake (Type 1) -> Rotor, Replace
Vehicle: 1997 GEO Metro LSI 1.3 L4 GAS
- Remove caliper assembly from rotor as described under "Bra... "
CLICK HERE TO GET FULL ACCESS TO 1997 GEO Metro BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 GEO Metro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 GEO Metro cars and light trucks from 1990+.
Anti-Lock Brakes -> Delphi (Delco-Moraine) Type VI -> DESCRIPTION -> ABS Warning Lamp -> Brake Warning Lamp -> Electronic Brake Control Module/Electronic Brake & Traction Control Module -> Expansion Spring Brake -> Hydraulic Modulator/Motor Pack Assembly -> System Components -> System Operation -> Wheel Speed Sensors
Vehicle: 1997 GEO Metro LSI 1.3 L4 GAS
System Operation
The function of the Anti-Lock Brake System (ABS) is to minimize wheel lock-up during heavy braking on most road surfaces. The system performs this function by monitoring wheel speed and controlling the brake fluid pressure to each front wheel and both rear wheels during braking. This allows the driver to retain directional stability and better steering capability.
System Components
Refer to Fig. for system component locations.
Electronic Brake Control Module/Electronic Brake & Traction Control Module
The ABS system is controlled by a microprocessor based Electronic Brak...
CLICK HERE TO GET FULL ACCESS TO 1997 GEO Metro BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 GEO Metro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 GEO Metro cars and light trucks from 1990+.
Disc Brakes -> Aisin-Seiki Single Piston Front Disc Brake (Type 1) -> Brake Pad Service
Vehicle: 1997 GEO Metro 1.0 L3 GAS
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship between front wheel and axle, then remove wheel and tire assembly.
- Remove two calip...
CLICK HERE TO GET FULL ACCESS TO 1997 GEO Metro BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 GEO Metro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 GEO Metro cars and light trucks from 1990+.
Power Brake Units -> Precautions
Vehicle: 1997 GEO Metro 1.0 L3 GAS
- After disassembling a power brake unit, soak all metal parts in solvent.
- Use only alcohol on parts containing rubber. After the parts have been thoroughly cleaned and rinsed in solvent, they should be rewashed in clean alcohol before assembling.
- Use compressed air...
CLICK HERE TO GET FULL ACCESS TO 1997 GEO Metro BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 GEO Metro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 GEO Metro cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Aurora, Bonneville, Eighty-Eight, LeSabre, LSS, Park Avenue, Regency & Riviera -> Corvette -> Disassemble -> Except Aurora, Bonneville, Eighty-Eight, LeSabre, LSS, Park Avenue, Regency & Riviera -> Master Cylinder Overhaul -> Wheel Cylinder Overhaul
Vehicle: 1997 GEO Metro 1.0 L3 GAS
Master Cylinder Overhaul
Except Aurora, Bonneville, Eighty-Eight, LeSabre, LSS, Park Avenue, Regency & Riviera
Disassemble
Refer to Figs. and when performing the following procedures.
- Remove master cylinder from vehicle as follows:
- Disconnect and plug hydraulic lines.
- Remove two master cylinder attaching nuts, then the master cylinder.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm.
- Remove fluid level switch, if equipped.
- On models with compact master cylinder, remove proportioner valve assembly, Fig. .
- On all models, depress pri...
CLICK HERE TO GET FULL ACCESS TO 1997 GEO Metro BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 GEO Metro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 GEO Metro cars and light trucks from 1990+.
Disc Brakes -> Aisin-Seiki Single Piston Front Disc Brake (Type 1) -> Caliper Service -> Assemble -> Disassemble -> Installation -> Removal
Vehicle: 1997 GEO Metro LSI 1.3 L4 GAS
Removal
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship between front wheel and axle, then remove wheel and tire assembly.
- If caliper assembly is to be serviced, remove inlet fitting attaching bolt, copper washer, and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do not crimp brake hose, as this may damage internal structure of hose. If only shoe and lining assemblies are to be replaced, do not disconnect brake line fitting from caliper.
- Remove caliper slide pins an...
CLICK HERE TO GET FULL ACCESS TO 1997 GEO Metro BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 GEO Metro vehicle. |
Access the Complete guide! |