Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Hyundai Sonata car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Hyundai Sonata automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Hyundai Sonata
- 1997 Hyundai Sonata 2.0 L4 GAS, CC:1997, Fuel Injection, Engine VIN:, Desg:F
- 1997 Hyundai Sonata GL 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
- 1997 Hyundai Sonata GL 2.0 L4 GAS, CC:1997, Fuel Injection, Engine VIN:, Desg:F
- 1997 Hyundai Sonata GLS 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Hyundai Sonata GLS 3.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect lower arm ball joint from steering knuckle using suitable tool.
- Disconnect driveshaft from axle hub using suitable tool.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft from transaxle assembly. Always use care not to damage transaxle and joint assem...
CLICK HERE TO GET FULL ACCESS TO 1997 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Hyundai Sonata 2.0 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect lower arm ball joint from steering knuckle using suitable tool.
- Disconnect driveshaft from axle hub using suitable tool.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft from transaxle assembly. Always use care not to damage transaxle and joint assembly. Do not ...
CLICK HERE TO GET FULL ACCESS TO 1997 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Hyundai Sonata GL 3.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect lower arm ball joint from steering knuckle using suitable tool.
- Disconnect driveshaft from axle hub using suitable tool.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft from transaxle assembly. Always use care not to damage transaxle and joint assem...
CLICK HERE TO GET FULL ACCESS TO 1997 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Hyundai Sonata GL 2.0 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect lower arm ball joint from steering knuckle using suitable tool.
- Disconnect driveshaft from axle hub using suitable tool.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft from transaxle assembly. Always use care not to damage transaxle and joint assembly. Do not ...
CLICK HERE TO GET FULL ACCESS TO 1997 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Hyundai Sonata vehicle.
|
| Access the Complete guide! |
