Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Nissan Altima car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Nissan Altima automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Nissan Altima
- 1997 Nissan Altima GLE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
- 1997 Nissan Altima GXE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
- 1997 Nissan Altima SE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
- 1997 Nissan Altima XE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> 240SX -> Altima -> Frontier, Pathfinder & Pickup -> Maxima -> Parking Brake -> Quest -> Sentra & 200SX
Vehicle: 1997 Nissan Altima GLE 2.4 L4 GAS
Parking Brake
Altima
- Prior to adjustment, check the following:
- On models equipped with rear disc brakes, ensure toggle lever returns to stopper when parking brake lever is released, Fig. .
- On all models, ensure there is no drag when parking brake lever is released.
- Release parking brake lever and loosen adjusting nut.
- Start engine and depress brake pedal fully at least 10 times with engine running.
- Pull parking brake control lever 4-5 notches, then adjust control lever by turning adjusting nut, Fig. .
- Pull control lever using approximately 44 lbs. of force, parking brake should be engaged ...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Front -> Overhaul -> Rear -> Replacement
Vehicle: 1997 Nissan Altima GLE 2.4 L4 GAS
Front
Replacement
- Raise and support front of vehicle and remove wheels.
- Disconnect brake hose from brake tube.
- Remove caliper assembly from spindle.
- Reverse procedure to install.
Overhaul
- Remove pin bolts and separate cylinder body from torque member.
- Remove pad retainers, shims and brake pads.
- Feed compressed air gradually into caliper port and force out piston(s) with dust seals.
- Remove piston seals, sub pins, main pins and dust seals.
- Reverse procedure to assemble.
Rear
Replacement
- Disconnect parking brake cable and brake hose.
- Remove caliper retaining bolts and caliper from vehicle.
- Reverse...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder, Replace
Vehicle: 1997 Nissan Altima GXE 2.4 L4 GAS
Master Cylinder, Replace
Do not spill brake fluid on painted areas, it may cause paint damage.
- Connect a vinyl tube to the bleeder screws.
- Depress brake pedal, open bleeder valves and drain fluid into suita...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting
Vehicle: 1997 Nissan Altima SE 2.4 L4 GAS
- With engine off, depress brake pedal several times. There should be no change in pedal stroke.
- With brake pedal depressed, start engine. Pedal should go down slightly.
- Run engine for two minutes, then turn engine off. Depress brake pedal slowly several times.
- Pe...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Anti-Lock Brakes -> Less Anti-Lock Brakes
Vehicle: 1997 Nissan Altima GLE 2.4 L4 GAS
Less Anti-Lock Brakes
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves, then depress brake pedal several times.
- With pressure applied to pedal open bleeder valve to release air trapped in system.
- Close bleeder, then release pedal slowly.
- Repeat steps 3 and 4 as outlined above until all air is removed from system.
- Bleed air from system in order as follows:
- Left rear whe...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Altima, Maxima, Sentra & 200SX -> Cleaning & Inspection -> External Proportioning Valve -> Frontier, Pathfinder & Pickup -> Master Cylinder Overhaul -> Overhaul -> Quest -> Replacement -> Testing
Vehicle: 1997 Nissan Altima GLE 2.4 L4 GAS
Master Cylinder Overhaul
Overhaul
Refer to Figs. through , for master cylinder overhaul procedures, noting the following:
- If piston assembly is stuck in cylinder bore, gradually apply air to fluid outlet port.
- Replace stopper cap if claws are damaged. Bend claw inward when installing new stopper.
Cleaning & Inspection
Examine reservoirs for foreign matter and check all passages for restrictions. If there is any indication of contamination or evidence of corrosion, service the hydraulic system as needed.
When disassembled, wash all parts in denatured alcohol or clean brake fluid. Use...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Nissan Altima vehicle.
|
| Access the Complete guide! |
