Auto Parts Search
We have info for following modifications of 1997 Nissan Quest
- 1997 Nissan Quest GXE 3.0 V6 GAS, CC:2960, Fuel Injection, Engine VIN:, Desg:1
- 1997 Nissan Quest XE 3.0 V6 GAS, CC:2960, Fuel Injection, Engine VIN:, Desg:1
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Nissan Quest AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Nissan Quest cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1997 Nissan Quest GXE 3.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove wheel bearing locknut. Suspend knuckle with mechanics wire to avoid stretching caliper brake hose. Do not pull or twist brake hose. Tie rod does not need to be disconnected from knuckle.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a soft hammer and pull down control arm to separate lower ball joint from knuckle.
- Separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Quest DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Nissan Quest AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Nissan Quest cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1997 Nissan Quest XE 3.0 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove wheel bearing locknut. Suspend knuckle with mechanics wire to avoid stretching caliper brake hose. Do not pull or twist brake hose. Tie rod does not need to be disconnected from knuckle.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a soft hammer and pull down control arm to separate lower ball joint from knuckle.
- Separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Quest DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Nissan Quest vehicle. |
Access the Complete guide! |