Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Acura RL car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Acura RL automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1998 Acura RL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura RL cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service
Vehicle: 1998 Acura RL 3.5 V6 GAS
Components are not designed to be rebuilt. If...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura RL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura RL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura RL cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 1998 Acura RL 3.5 V6 GAS
Front
- Raise and support front of vehicle, then remove tire and wheel assemblies.
- Remove pin bolt and pivot caliper up away from rotor.
- Remove brake pad shims and pads, Figs. through .
- Clean caliper and inspect for excessive wear or damage.
- Install pad retainers, shims and pads.
- Back out bleed screw and push in piston to allow caliper to fit over pads. Tighten bleed screw
- Pivot caliper into position, install pin bolt and tighten.
Rear
- Raise and support rear of vehicle, then remove tire and wheel assemblies.
- Remove caliper shield and release parking...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura RL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura RL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura RL cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble & Installation -> Front -> Integra, RSX, 2.2CL, 2.3CL, 2.5TL, 3.0CL & 1997-98 3.2TL -> MDX, 3.2CL, 3.5RL & 1999-2002 3.2TL -> Rear -> Removal & Disassemble
Vehicle: 1998 Acura RL 3.5 V6 GAS
Front
Removal & Disassemble
- Raise and support front of vehicle, then remove tire and wheel assemblies.
- Remove banjo bolt and disconnect brake line. Secure hose in raised position.
- Remove pin bolt and caliper, Figs. through .
- Remove pad spring.
- Position suitable block of wood or shop rag in caliper opposite piston.
- Remove piston by applying compressed air into fluid inlet port.
- Remove piston boot and seal.
Assemble & Installation
- Clean caliper bore and piston with brake fluid, then inspect for excessive wear or damage.
- Apply suitable grease and install new piston seal in cylinder groove.
- In...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura RL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura RL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura RL cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Anti-Lock Brake (ALB) System -> Conventional Brake System
Vehicle: 1998 Acura RL 3.5 V6 GAS
Conventional Brake System
- Fill master cylinder reservoir with brake fluid.
- Raise and support vehicle.
- Position drain pan under righthand rear wheel.
- Have an assistant depress brake pedal with slow, even pressure and hold it down. Do not depress brake pedal to end of master cylinder stroke.
- Open bleed valve one full turn. Watch for air bubbles in fluid and listen for air escaping from system.
- With brake pedal still depressed, close bleeder valve.
- Have an assistant pump brake pedal several times. Do not depress brake pedal fully to end of master cylinder piston stroke.
- After bleeding ...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura RL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura RL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura RL cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting -> ALB Checker -> CL -> CL & RL -> Fail-Safe Motor Relay -> Function Test -> Integra -> Integra & TL -> RL -> Solenoid Leak Test -> Temporary Driving Conditions -> TL -> Warning Lamp -> Warning Lamp Circuit -> Wheel Sensor Signal Confirmation
Vehicle: 1998 Acura RL 3.5 V6 GAS
ALB Checker
Never drive vehicle while ALB checker is operating. A collision may result from a reduction or complete loss of braking ability.
The checker should be used to confirm proper system operation under any of the following conditions:
- After replacing or bleeding system fluid.
- After replacing any ABS component.
- After any body or suspension repair that may cause malfunctions within wires or sensors.
Function Test
- Park vehicle on level ground with wheels blocked and parking brake set. On models equipped with manual transaxle, place in neutral. On models equipped with automatic tran...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura RL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura RL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura RL cars and light trucks from 1990+.
Disc Brakes -> Precautions -> Radio Coded Theft Protection System
Vehicle: 1998 Acura RL 3.5 V6 GAS
Radio Coded Theft Protection System
Anti-theft radios have a coded theft protection circuit. The security code number must be obtained before disconnecting battery, removing radio fuse or ...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura RL BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
