Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Chevrolet Metro car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Chevrolet Metro automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Chevrolet Metro
- 1998 Chevrolet Metro 1.0 L3 GAS, CC:993, CID:61, Fuel Injection, Aspiration:61, Engine VIN:, Desg:6
- 1998 Chevrolet Metro LSI 1.3 L4 GAS, CC:1295, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:2
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Chevrolet Metro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Chevrolet Metro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Chevrolet Metro LSI 1.3 L4 GAS
- Raise and support vehicle.
- Remove front tire and wheel assembly.
- Remove one bolt and ABS speed sensor from steering knuckle (if equipped).
- Unstake wheel drive shaft nut.
- Remove wheel drive shaft nut and washer.
- Remove ball stud bolt. Ball stud bolt is threaded into steering knuckle. Protect drive axle seals from sharp tools and from sharp edges of surrounding components. Any damage to seals or clamps, will result in leaking of joint lubricating grease from inner and outer joints; and entering of contaminates into inner and outer joints. This condition will lead to noisy drive ...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Metro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Chevrolet Metro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Chevrolet Metro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Chevrolet Metro 1.0 L3 GAS
- Raise and support vehicle.
- Remove front tire and wheel assembly.
- Remove one bolt and ABS speed sensor from steering knuckle (if equipped).
- Unstake wheel drive shaft nut.
- Remove wheel drive shaft nut and washer.
- Remove ball stud bolt. Ball stud bolt is threaded into steering knuckle. Protect drive axle seals from sharp tools and from sharp edges of surrounding components. Any damage to seals or clamps, will result in leaking of joint lubricating grease from inner and outer joints; and entering of contaminates into inner and outer joints. This condition will lead to noisy drive ...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Metro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



