Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Ford Explorer car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Ford Explorer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Ford Explorer
- 1998 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:X
- 1998 Ford Explorer 5.0 V8 GAS, CID:302, Fuel Injection, Aspiration:302, Engine VIN:, Desg:P
- 1998 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
A/C & HEATER SERVICE PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Ford Explorer cars and light trucks from 1990+
Computer Relearn Procedures -> Ford Motor Co. -> 1999-2002 -> 2003-04 -> Automatic Data Transfer -> Except 1999-2002 -> Manual Data Entry -> Powertrain Control Module (PCM)
Vehicle: 1998 Ford Explorer 5.0 V8 GAS
Powertrain Control Module (PCM)
Except 1999-2002
Disconnect negative battery cable for a minimum of five minutes. After clearing memory, it is required to drive vehicle a minimum of 10 miles to allow PCM time to relearn operating strategy.
1999-2002
Automatic Data Transfer
- Prior to removing old PCM, connect a suitably programmed scan tool to Data Link Connector (DLC).
- Follow scan tool manufacturers' instructions to download data from old PCM.
- Install new PCM and connect scan tool to DLC.
- Follow scan tool manufactur...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Ford Explorer cars and light trucks from 1990+
Serpentine Drive Belt Routing -> Domestic Light Trucks & Vans -> Ford Motor Co.
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Ford Explorer cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Water Pump, Replace -> 1998 -> 1999-2000 -> 2.5L Engine -> 3.0L Engine -> 3.8L Engine -> 4.0L Engine -> 4.0L Pushrod Engine -> 4.0L SOHC Engine -> 4.2L Engine -> 4.6L, 5.4L & 6.8L Engines -> 5.0L Engine -> 7.3L Diesel Engine -> Diesel Engine -> Econoline -> Excursion -> Expedition & Navigator -> Explorer & Mountaineer -> F-Series -> Gasoline Engine -> Ranger -> Villager -> Windstar
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
Econoline
4.2L Engine
- Drain coolant into suitable container.
- Remove fan and fan clutch.
- Remove accessory drive belt.
- Remove lower radiator hose from water pump.
- Disconnect engine harness from water pump mounting stud and water bypass tube.
- Remove A/C compressor support bracket.
- Remove bolts and pulley from water pump.
- Remove bypass tube from water pump.
- Remove bolts (A) and stud bolts (B), Fig. , from water pump, then remove pump from cover.
- Reverse procedure to install, noting the following:
-
...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Ford Explorer cars and light trucks from 1990+
Computer Relearn Procedures -> Ford Motor Co. -> 1999-2002 -> 2003-04 -> Automatic Data Transfer -> Except 1999-2002 -> Manual Data Entry -> Powertrain Control Module (PCM)
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
Powertrain Control Module (PCM)
Except 1999-2002
Disconnect negative battery cable for a minimum of five minutes. After clearing memory, it is required to drive vehicle a minimum of 10 miles to allow PCM time to relearn operating strategy.
1999-2002
Automatic Data Transfer
- Prior to removing old PCM, connect a suitably programmed scan tool to Data Link Connector (DLC).
- Follow scan tool manufacturers' instructions to download data from old PCM.
- Install new PCM and connect scan tool to DLC.
- Follow scan tool manufactur...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Ford Explorer cars and light trucks from 1990+
Electrical Symbol & Wire Color Code Identification -> Electrical Symbol Identification -> Domestic Vehicles
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Ford Explorer cars and light trucks from 1990+
General Service Domestic Vehicles -> 1998-2000 -> Precautions -> A/C Refrigerant Oil -> Battery Ground Cable -> Cleanliness -> Engine Coolant -> Exercise System -> General Service -> Product Compatibility -> R-134a -> Safety
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
Battery Ground Cable
Prior to service disconnect battery ground cable and isolate as required.
Product Compatibility
A/C Refrigerant Oil
Before replenishing refrigerant oil, ensure product compatibility with the system being serviced. Refer to "A/C Data" for specifications.
Engine Coolant
Before adding or replacing engine coolant, ensure product compatibility with the system being serviced. If using orange silicate-free coolant, do not mix with green silicated coolant. If mixed, premature engine, heater core or radiator corrosion may result.
...CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
