Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Ford Taurus car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Ford Taurus automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Ford Taurus
- 1998 Ford Taurus GL 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 1998 Ford Taurus GL 3.0 V6 FLEX, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:1
- 1998 Ford Taurus GL 3.0 V6 FLEX, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:2
- 1998 Ford Taurus LX 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:S
- 1998 Ford Taurus SHO 3.4 V8 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:N
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Ford Taurus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Ford Taurus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Ford Taurus GL 3.0 V6 GAS
- Raise and support vehicle, then remove front wheels.
- Remove and discard front axle retainer nut and washer.
- Remove nut from stabilizer bar link at shock absorber end, then remove link from shock and position aside.
- Remove nut from lower ball joint, then using a suitable pitman arm type puller, loosen ball joint in lower control arm.
- Place a suitable pry bar through opening in lower control arm and under frame, then pry down on control arm to release lower ball joint.
- Remove outer CV joint from hub using suitable tools, noting the following:
- Do not use a hammer to drive joint fr...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Taurus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Ford Taurus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Ford Taurus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Ford Taurus GL 3.0 V6 FLEX
- Raise and support vehicle, then remove front wheels.
- Remove and discard front axle retainer nut and washer.
- Remove nut from stabilizer bar link at shock absorber end, then remove link from shock and position aside.
- Remove nut from lower ball joint, then using a suitable pitman arm type puller, loosen ball joint in lower control arm.
- Place a suitable pry bar through opening in lower control arm and under frame, then pry down on control arm to release lower ball joint.
- Remove outer CV joint from hub using suitable tools, noting the following:
- Do not use a hammer to drive joint fr...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Taurus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Ford Taurus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Ford Taurus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Ford Taurus LX 3.0 V6 GAS
- Raise and support vehicle, then remove front wheels.
- Remove and discard front axle retainer nut and washer.
- Remove nut from stabilizer bar link at shock absorber end, then remove link from shock and position aside.
- Remove nut from lower ball joint, then using a suitable pitman arm type puller, loosen ball joint in lower control arm.
- Place a suitable pry bar through opening in lower control arm and under frame, then pry down on control arm to release lower ball joint.
- Remove outer CV joint from hub using suitable tools, noting the following:
- Do not use a hammer to drive joint fr...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Taurus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Ford Taurus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Ford Taurus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Ford Taurus GL 3.0 V6 FLEX
- Raise and support vehicle, then remove front wheels.
- Remove and discard front axle retainer nut and washer.
- Remove nut from stabilizer bar link at shock absorber end, then remove link from shock and position aside.
- Remove nut from lower ball joint, then using a suitable pitman arm type puller, loosen ball joint in lower control arm.
- Place a suitable pry bar through opening in lower control arm and under frame, then pry down on control arm to release lower ball joint.
- Remove outer CV joint from hub using suitable tools, noting the following:
- Do not use a hammer to drive joint fr...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Taurus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Ford Taurus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Ford Taurus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Ford Taurus SHO 3.4 V8 GAS
- Raise and support vehicle, then remove front wheels.
- Remove and discard front axle retainer nut and washer.
- Remove nut from stabilizer bar link at shock absorber end, then remove link from shock and position aside.
- Remove nut from lower ball joint, then using a suitable pitman arm type puller, loosen ball joint in lower control arm.
- Place a suitable pry bar through opening in lower control arm and under frame, then pry down on control arm to release lower ball joint.
- Remove outer CV joint from hub using suitable tools, noting the following:
- Do not use a hammer to drive joint fr...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Taurus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1998 Ford Taurus vehicle.
|
| Access the Complete guide! |
