Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 GMC K1500 Pickup car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 GMC K1500 Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 GMC K1500 Pickup
- 1998 GMC K1500 Pickup Sierra 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 1998 GMC K1500 Pickup Sierra 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 1998 GMC K1500 Pickup Sierra 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:S
- 1998 GMC K1500 Pickup Sierra 5.0 V8 GAS, CID:305, Fuel Injection, Aspiration:305, Engine VIN:, Desg:M
- 1998 GMC K1500 Pickup Sierra XC 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 1998 GMC K1500 Pickup Sierra XC 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 1998 GMC K1500 Pickup Sierra XC 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:S
- 1998 GMC K1500 Pickup Sierra XC 5.0 V8 GAS, CID:305, Fuel Injection, Aspiration:305, Engine VIN:, Desg:M
BRAKE SERVICE PROCEDURES FOR 1998 GMC K1500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 GMC K1500 Pickup cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Brake Pad Service -> Installation -> Removal
Vehicle: 1998 GMC K1500 Pickup Sierra 6.5 V8 DIESEL
Removal
- Remove caliper as outlined under "Caliper Service."
- Remove inboard pad with retainer spring.
- Remove outboard pad and position caliper on front suspension so brake hose will not support weight of caliper.
- Remove two sleeves from inboard ears of caliper.
- Remove four rubber bushings from grooves in each of caliper ears.
Installation
- Lubricate new sleeves, rubber bushings, bushing grooves and mounting bolt ends with lubricant part No. 19010909, or equivalent.
- Install new bushings and sleeves in caliper e...
CLICK HERE TO GET FULL ACCESS TO 1998 GMC K1500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 GMC K1500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 GMC K1500 Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 1998 GMC K1500 Pickup Sierra 5.7 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in the bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect ...
CLICK HERE TO GET FULL ACCESS TO 1998 GMC K1500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 GMC K1500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 GMC K1500 Pickup cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Astro, Bravada, S & T Series & Safari -> Aztek -> C & K Series -> Duo-Servo -> G Series -> Installation -> Montana, Silhouette, Trans Sport & Venture -> P Series -> Removal -> Single-Servo -> Tracker
Vehicle: 1998 GMC K1500 Pickup Sierra XC 5.0 V8 GAS
C & K Series
Duo-Servo
Removal
- Raise and support vehicle.
- Mark relationship of wheel to hub, then remove tire and wheel assembly.
- On models equipped with full-floating axles, remove hub and drum assembly as described in "Drive Axles."
- On models equipped with semi-floating axles, proceed as follows:
- Install pin into park brake lever.
- Mark relationship of drum to axle.
- Remove rear brake drum retainers, as required.
- Remove rear brake drum.
- On all models, remove return springs and shoe guide, Fig. .
- Remove brake hold down springs and pins.
- Disconnect actuator lever and pivot.
- Remove lever return spri...
CLICK HERE TO GET FULL ACCESS TO 1998 GMC K1500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 GMC K1500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 GMC K1500 Pickup cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Astro, Bravada, S & T Series & Safari -> Automatic Apply Parking Brakes -> Aztek, Montana, Silhouette, Trans Sport & Venture -> C & K Series -> Control Rod -> G & P Series -> Lever Type -> Manual Parking Brake -> Optional Method -> Pedal Type -> Propeller Shaft Type -> Service Brake -> Standard Method -> Tracker
Vehicle: 1998 GMC K1500 Pickup Sierra 5.7 V8 GAS
Service Brake
These brakes have self-adjusting shoe mechanisms that ensure correct lining-to-drum clearances at all times. The automatic adjusters operate only when the brakes are applied as the vehicle is moving rearward or when the car comes to an uphill stop.
Although the brakes are self-adjusting, an initial adjustment is necessary after the brake shoes have been relined or replaced, or when the length of the adjusting screw has been changed during some other service operation.
Frequent usage of an automatic transmission forward range to halt reverse vehicle motion may prevent the ...
CLICK HERE TO GET FULL ACCESS TO 1998 GMC K1500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 GMC K1500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 GMC K1500 Pickup cars and light trucks from 1990+.
Anti-lock Brakes -> Kelsey-Hayes -> Diagnosis & Testing -> 1997 Astro -> 1997 C & K Series -> 1997 G-Series -> 1997 P-Series -> 1997 S & T Series -> 1997-99 -> 1997-99 Except 1999 Sierra & Silverado -> 1997-99 G Van & P Series -> 1998 Astro -> 1998 C & K Series -> 1998 G-Series -> 1998 P-Series -> 1998 S & T Series -> 1999 Astro -> 1999 C & K Series Except Sierra & Silverado -> 1999 G-Series -> 1999 P-Series -> 1999 S & T Series -> 1999 Sierra & Silverado -> 2000 Astro -> 2000 C & K Series except Sierra, Silverado, Suburban, Tahoe & Yukon -> 2000 G-Series -> 2000 S & T Series -> 2000 Sierra -> 2000 Silverado -> 2000 Suburban -> 2000 Tahoe -> 2000 Yukon -> 2000-01 -> 2000-01 G Van -> 2001 Astro -> 2001 C & K Series -> 2001 G-Series -> 2001 S & T Series -> Accessing Diagnostic Trouble Codes -> Astro, Safari & S & T Series -> C & K Series -> Clearing Diagnostic Trouble Codes -> Connector Pin ID -> Diagnostic Process -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Enhanced Diagnostics -> G Van & P Series -> Intermittents & Poor Connections -> Temperature Vs. Resistance -> Wiring Diagrams
Vehicle: 1998 GMC K1500 Pickup Sierra XC 5.0 V8 GAS
Accessing Diagnostic Trouble Codes
Diagnostic trouble codes (DTCs) can only be read by connecting a suitably programmed scan tool to the Data Link Connector (DLC) and following the tool manufacturer instructions.
Diagnostic Trouble Code Interpretation
Refer to Figs. and , for Diagnostic Trouble Code (DTC) interpretation.
Wiring Diagrams
Refer "Wiring Diagrams" in "Vehicle Systems"
Connector Pin ID
On 2000 S & T Series only, ensure correct anti-lock brake system connector pin identifications are used.
[[table data]]Diagnostic Process
- Inspect master cylinder reservoir fluid level and for possible fluid...
CLICK HERE TO GET FULL ACCESS TO 1998 GMC K1500 Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 GMC K1500 Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 GMC K1500 Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Height Sensing Proportioning Valve
Vehicle: 1998 GMC K1500 Pickup Sierra 5.7 V8 GAS
Height Sensing Proportioning Valve
The height sensing proportioning valve must be adjusted whenever the valve and/or linkage is disassembled or removed for service. In addition, adjustment should be checked if excessive front wheel lock-up is experienced with a lower than desired brake application rate when vehicle is at or near maximum GVWR.
- Raise and support vehicle, leave wheels on and allow axle to hang freely.
- Remove lever retaining nut and disconnect lever from valve shaft, Fig. .
- Rotate valve shaft to permit installation of correct adjustment gauge, Fig. , ensure D shaped ho...
CLICK HERE TO GET FULL ACCESS TO 1998 GMC K1500 Pickup BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1998 GMC K1500 Pickup vehicle.
|
| Access the Complete guide! |
