1998 Mazda Protege A/C & Heater Service (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Mazda Protege car and truck repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1998 Mazda Protege automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1998 Mazda Protege

  • 1998 Mazda Protege DX 1.5 L4 GAS, CC:1489, Fuel Injection
  • 1998 Mazda Protege ES 1.8 L4 GAS, CC:1839, Fuel Injection
  • 1998 Mazda Protege LX 1.5 L4 GAS, CC:1489, Fuel Injection

A/C & HEATER SERVICE PROCEDURES FOR 1998 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Mazda Protege cars and light trucks from 1990+

Air Bag System Precautions -> Mazda -> Arming -> 1990-93 -> 1994-96 -> 1997-2001 -> 2002-04
Vehicle: 1998 Mazda Protege DX 1.5 L4 GAS

NOTE: For B2300, B3000 And B4000, Refer To "Ranger" In "Ford Motor Co."

NOTE: For Tribute, Refer To "Escape" In "Ford Motor Co."

1990-93
  • On 929 models, refer to "1994-96."
  • On all models, connect orange and blue clockspring electrical connectors, then the battery ground cable.
  • Inspect system operation by observing air bag system warning lamp operation.
  • If system is operating properly, warning lamp will come on when ignition switch is placed in the On position, then go off after approximately six seconds.
1994-96
  • On 1994 Miata, MX-6 and 62...

CLICK HERE TO GET FULL ACCESS TO 1998 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1998 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Mazda Protege cars and light trucks from 1990+

Mazda -> Component Replacement & Adjustment -> Blower Motor, Replace -> B-Series -> Front -> Miata, Millenia, Protege & 626 -> MPV -> Rear
Vehicle: 1998 Mazda Protege ES 1.8 L4 GAS

Miata, Millenia, Protege & 626
  • On Millenia and 626 models, remove under cover.
  • On all models, disconnect connector.
  • Remove mounting bolt and blower, Figs. through .
  • Reverse procedure to install. Torque mounting bolts to 70-94 inch lbs.
MPV
Front
  • Disconnect electrical connector.
  • Remove mounting bolts and blower motor.
  • Reverse procedure to install.
Rear
  • Re...

CLICK HERE TO GET FULL ACCESS TO 1998 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1998 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Mazda Protege cars and light trucks from 1990+

Mazda -> Component Replacement & Adjustment -> Evaporator Core, Replace -> 1998 -> 1999-2000 -> 2000 -> 626 -> B-Series -> Front -> Miata -> Millenia -> MPV -> Protege -> Rear
Vehicle: 1998 Mazda Protege ES 1.8 L4 GAS

Miata
  • Recover refrigerant as outlined under .
  • Remove glove compartment.
  • Disconnect high and low pressure lines from cooling unit, Fig. . Cap or plug lines and openings.
  • Remove seal plate, mounting nuts and cooling unit.
  • Remove thermoswitch and separate cases, Fig. .
  • Remove tar patty, pipe, expansion valve and evaporator core.
  • Reverse procedure to install, noting the following:
    • Lubricate new O-rings with suitable refrigerant oil.
    • Position thermoswitch as show, Fig. .
    • Torque mounting nuts to 70-94 inch lb...

CLICK HERE TO GET FULL ACCESS TO 1998 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1998 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Mazda Protege cars and light trucks from 1990+

Air Bag System Precautions -> Mazda -> Disarming -> 1990-93 -> 1994-96 -> 1997-2001 -> 2002-04
Vehicle: 1998 Mazda Protege DX 1.5 L4 GAS

NOTE: For B2300, B3000 And B4000, Refer To "Ranger" In "Ford Motor Co."

NOTE: For Tribute, Refer To "Escape" In "Ford Motor Co."

1990-93
  • On 929 models, refer to "1994-96."
  • On models equipped with audio anti-theft, obtain audio unit anti-theft code number from vehicle owner.
  • On all models, disconnect battery ground cable.
  • On Miata models, disconnect orange and blue air bag clockspring connectors, Fig. .
  • On 626, MX-6 and RX-7 models, remove lower lefthand sound insulator from instrument panel, then disconnect clockspring orange and blue connectors, Figs...

CLICK HERE TO GET FULL ACCESS TO 1998 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1998 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Mazda Protege cars and light trucks from 1990+

Mazda -> Component Replacement & Adjustment -> Radiator Fan, Replace -> 2000 -> 626 -> Miata -> Millenia -> MPV -> Protege
Vehicle: 1998 Mazda Protege LX 1.5 L4 GAS

Miata
  • Disconnect fan connector.
  • Remove mounting nut and fan, Fig. .
  • Remove mounting bolt and motor.
  • Reverse procedure to install, noting the following:
    • Torque motor mounting bolt to 35-43 ft. lbs.
    • Torque fan mounting nut to 27-34 ft. lbs.
Millenia
  • On models equipped with 2.3L engine, remove radiator grille as described under "Radiator, Replace."
  • On models equipped with 2.5L engine, remove upper seal board.
  • On all models, disconnect fan motor connectors.
  • Remove mounting bolts and fan cow...

CLICK HERE TO GET FULL ACCESS TO 1998 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1998 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Mazda Protege cars and light trucks from 1990+

Mazda -> Technical Service Bulletins -> Musty/Mildew Odor -> All
Vehicle: 1998 Mazda Protege DX 1.5 L4 GAS

All

On some of these models there may be a musty/mildew odor when the air conditioning is first turned on.

This condition may be caused by mold growth in evaporator unit.

To correct this condition apply AirSept Air Cooling Coil Coating, or equivalent. This is a seasonal repair and may not be a long-term solution. Vehicl...

CLICK HERE TO GET FULL ACCESS TO 1998 Mazda Protege A/C & HEATER SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Mazda Protege vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find