Auto Parts Search
We have info for following modifications of 1998 Nissan 200SX
- 1998 Nissan 200SX 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1998 Nissan 200SX 2.0 L4 GAS, CC:1998, Fuel Injection
- 1998 Nissan 200SX SE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1998 Nissan 200SX SE-R 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:B
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Nissan 200SX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Nissan 200SX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1998 Nissan 200SX 2.0 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove wheel bearing locknut. Suspend knuckle with mechanics wire to avoid stretching caliper brake hose. Do not pull or twist brake hose. Tie rod does not need to be disconnected from knuckle.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a soft hammer and pull down control arm to separate lower ball joint from knuckle.
- Separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 1998 Nissan 200SX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Nissan 200SX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Nissan 200SX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1998 Nissan 200SX SE-R 2.0 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove wheel bearing locknut. Suspend knuckle with mechanics wire to avoid stretching caliper brake hose. Do not pull or twist brake hose. Tie rod does not need to be disconnected from knuckle.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a soft hammer and pull down control arm to separate lower ball joint from knuckle.
- Separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 1998 Nissan 200SX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Nissan 200SX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Nissan 200SX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1998 Nissan 200SX SE 1.6 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove wheel bearing locknut. Suspend knuckle with mechanics wire to avoid stretching caliper brake hose. Do not pull or twist brake hose. Tie rod does not need to be disconnected from knuckle.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a soft hammer and pull down control arm to separate lower ball joint from knuckle.
- Separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 1998 Nissan 200SX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Nissan 200SX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Nissan 200SX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1998 Nissan 200SX 1.6 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove wheel bearing locknut. Suspend knuckle with mechanics wire to avoid stretching caliper brake hose. Do not pull or twist brake hose. Tie rod does not need to be disconnected from knuckle.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a soft hammer and pull down control arm to separate lower ball joint from knuckle.
- Separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 1998 Nissan 200SX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Nissan 200SX vehicle. |
Access the Complete guide! |