Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Dodge Neon car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Dodge Neon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Dodge Neon
- 1999 Dodge Neon 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:Y
- 1999 Dodge Neon 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 1999 Dodge Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Dodge Neon cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Troubleshooting -> Lateral Runout Inspection -> Parallelism Inspection
Vehicle: 1999 Dodge Neon 2.0 L4 GAS
Lateral Runout Inspection
Refer to "Disc Brake Specifications" for runout specifications.
- Raise and support vehicle, then remove wheels.
- If applicable, ensure wheel bearings are properly adjusted.
- Install lug nuts or bolts using suitable spacers.
- Mount a dial indicator to vehicle, then position dial indicator plunger so it contacts rotor at a point one inch from outer edge.
- Rotate rotor and note dial indicator readings. Perform this inspection on both inboard an...
CLICK HERE TO GET FULL ACCESS TO 1999 Dodge Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Dodge Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Dodge Neon cars and light trucks from 1990+.
Drum Brakes -> Type 1 -> Troubleshooting
Vehicle: 1999 Dodge Neon 2.0 L4 GAS
Refer to Fig. f...
CLICK HERE TO GET FULL ACCESS TO 1999 Dodge Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Dodge Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Dodge Neon cars and light trucks from 1990+.
Anti-lock Brakes -> Teves Anti-Lock Braking System -> System Service -> 1999 -> 1999 Neon -> 1999-2000 -> 1999-2000 Sebring Convertible & Stratus -> 2000-03 -> 2000-03 Neon -> 2001-03 -> 2001-03 Sebring Convertible, Sebring Sedan & Stratus Sedan -> Brake System Bleed -> Breeze & Cirrus -> Component Replacement -> Concorde, Intrepid, LHS & 300M -> Controller Anti-Lock Brake (CAB) -> Front -> Integrated Control Unit (ICU) -> Neon -> Rear -> Sebring Convertible, Sebring Sedan & Stratus Sedan -> Wheel Speed Sensor
Vehicle: 1999 Dodge Neon 2.0 L4 GAS
Brake System Bleed
The TEVES Mark 20e anti-lock brake system must be bled as two independent braking systems. The non-ABS portion of the brake system should be bled the same as any non-ABS system. The ABS portion of the system requires the use of a DRB, or equivalently programmed scan tool.
- To bleed non-ABS portion of system, refer to "Hydraulic Brakes."
- To bleed the ABS portion of the system, connect DRB scan tool to vehicle diagnostics connector, located under the lefthand side of instrument panel.
- Set can tool to Bleed ABS routine.
- Apply brake pedal firmly and initiate Bleed ABS cycl...
CLICK HERE TO GET FULL ACCESS TO 1999 Dodge Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Dodge Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Dodge Neon cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Caliper Service -> Overhaul -> Replace
Vehicle: 1999 Dodge Neon 2.0 L4 GAS
Replace
- Remove caliper from brake rotor and brake pads from caliper as outlined in "Brake Pad Service."
- Disconnect brake hose at brake caliper, then cap brake line.
- Reverse procedure to install.
Overhaul
- Remove caliper from rotor as outlined under "Brake Pad Service."
- Place a small piece of wood between piston and caliper fingers, then carefully depress brake pedal to hydraulically push piston out of bore. Prop brake pedal to any position below first inch of brake pedal travel to prevent brake fluid loss.
- If pistons are to be removed from both calipers, disconnect brake hose at frame brack...
CLICK HERE TO GET FULL ACCESS TO 1999 Dodge Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Dodge Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Dodge Neon cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Tightening Specifications
Vehicle: 1999 Dodge Neon 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1999 Dodge Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Dodge Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Dodge Neon cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Decreasing Brake Pedal Travel -> Dragging Brakes -> Hard Brake Pedal
Vehicle: 1999 Dodge Neon 2.0 L4 GAS
Decreasing Brake Pedal Travel
If a decreasing brake pedal is encountered, the power brake unit may be binding internally. To test the power brake unit for this condition proceed as follows:
- Place transmission shift lever into Neutral and start engine.
- Increase engine speed to approximately 1500 RPM, close throttle and completely depress brake pedal.
- Slowly release brake pedal and stop engine.
- Remove vacuum check valve and hose from power brake unit. Observe for backward movement of brake pedal.
- If brake pedal moves backward, power brake unit has internal binding. Replace power brake u...
CLICK HERE TO GET FULL ACCESS TO 1999 Dodge Neon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
