Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Honda Prelude car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Honda Prelude automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Honda Prelude
- 1999 Honda Prelude 2.2 L4 GAS, CC:2156, Fuel Injection
- 1999 Honda Prelude SH 2.2 L4 GAS, CC:2156, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1999 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1997 -> 1997 Accord -> 1997-2000 -> 1997-2000 Civic -> 1997-2001 -> 1997-2001 CR-V -> 1997-98 -> 1997-98 Odyssey -> 1998-2002 -> 1998-2002 Accord -> 1999-2002 -> 1999-2002 Odyssey -> 2001-02 -> 2001-02 Civic -> 2002 -> 2002 CR-V -> Accessing Diagnostic Trouble Codes -> Accord -> Accord & Odyssey -> Accord & S2000 -> Civic -> Clearing Diagnostic Trouble Codes -> CR-V -> del Sol -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Function Test -> Modulator Function Inspection -> Odyssey -> Prelude -> S2000 -> Solenoid Leak Test -> System Tests -> Wheel Sensor Signal Confirmation -> Wiring Diagrams
Vehicle: 1999 Honda Prelude SH 2.2 L4 GAS
Accessing Diagnostic Trouble Codes
Accord
1997
- Connect SCS service connector to service check connector under glove compartment, Fig. .
- Turn ignition switch on, but do not start engine.
- Record blinking frequency of ABS indicator light. Blinking frequency indicates diagnostic trouble code. Memory of diagnostic trouble code is erased if connector is disconnected from ABS control unit.
1998-2002
- Connect PGM tester to 16-pin DLC located behind driver's side kick panel with ignition switch off.
- Select "SCS" on the display, then press "Yes" at "Service Check Signal" mode.
- Turn ignition switch to...
CLICK HERE TO GET FULL ACCESS TO 1999 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1997-2000 -> 1997-2001 -> 2002 -> Accord -> Accord & Odyssey -> Accumulator -> Accumulator Disposal -> Brake Fluid Change -> Brake System Bleed -> Civic -> Civic & CR-V -> Component Replacement -> Control Unit -> CR-V -> del Sol -> del Sol & Prelude -> Front -> Front Speed Sensor -> Modulator -> Odyssey -> Prelude -> Pulser & Sensor Gap Measurement -> Rear -> Rear Speed Sensor -> S2000 -> System Pressure Relief
Vehicle: 1999 Honda Prelude SH 2.2 L4 GAS
System Pressure Relief
Accord & Odyssey
- Remove bleeder cap from maintenance bleeder on modulator unit, then attach a suitable wrench to bleeder.
- Connect a rubber tube to bleeder and place other end in a container, Fig. .
- While holding tube in hand, loosen maintenance bleeder 1/8- 1/4 turn and collect fluid in container. Do not loosen bleeder too much; brake fluid is under high pressure and can burst out.
- Tighten maintenance bleeder to specification.
del Sol
- Drain brake fluid from master cylinder and modulator reservoir thoroughly as outlined under "Brake Fluid Change."
- Using bleeder t-wre...
CLICK HERE TO GET FULL ACCESS TO 1999 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Honda Prelude cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> Adjustment
Vehicle: 1999 Honda Prelude 2.2 L4 GAS
Adjustment
Refer to...
CLICK HERE TO GET FULL ACCESS TO 1999 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Honda Prelude cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder, Replace
Vehicle: 1999 Honda Prelude SH 2.2 L4 GAS
Master Cylinder, Replace
- Remove master cylinder reservoir cap, then suck fluid from reservoir with a suitable syringe.
- Disconnect brake lines from master cylinder, then all necessary electrical connectors.
- Remove master cylinder to brake booster retaining nuts.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 1999 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Honda Prelude cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Installation -> Rear -> Removal
Vehicle: 1999 Honda Prelude 2.2 L4 GAS
Front
Removal
- Refer to Figs. through when replacing brake pads.
- Raise and support front of vehicle, then remove wheel and tire assemblies.
- Remove brake hose clamp bolts from steering knuckle, Fig. .
- Remove caliper bolt, then swing caliper up out of the way.
- Remove shims, retainers and brake pads.
Installation
- Using vernier caliper, measure thickness of each pad lining. Compare measurement with specifications. If brake lining thickness is less than specified, replace both pads as a set.
- Clean caliper thoroughly, and check for grooves or cracks. Repair or replace as necessary.
- Install ...
CLICK HERE TO GET FULL ACCESS TO 1999 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Honda Prelude cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 1999 Honda Prelude SH 2.2 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1999 Honda Prelude BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
