Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Mazda Protege car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Mazda Protege automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Mazda Protege
- 1999 Mazda Protege 1.6 L4 GAS, CC:1589, Fuel Injection, Engine VIN:, Desg:0
- 1999 Mazda Protege 1.8 L4 GAS, CC:1839, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Mazda Protege AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Mazda Protege cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1999 Mazda Protege 1.8 L4 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove retainers and splash shield.
- Drain transaxle oil in suitable container.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Protege DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Mazda Protege AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Mazda Protege cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1999 Mazda Protege 1.6 L4 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove retainers and splash shield.
- Drain transaxle oil in suitable container.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Protege DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Mazda Protege vehicle.
|
| Access the Complete guide! |
