Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Mercury Mystique car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Mercury Mystique automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Mercury Mystique
- 1999 Mercury Mystique 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1999 Mercury Mystique 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
BRAKE SERVICE PROCEDURES FOR 1999 Mercury Mystique AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mercury Mystique cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake System Bleed -> System Priming -> Wheel Bleeding Sequence
Vehicle: 1999 Mercury Mystique 2.5 V6 GAS
Pressure bleeding is recommended for all hydraulic disc brake systems.
Do not reuse brake fluid drained from the hydraulic system when bleeding the brakes. Ensure disc brake pistons are returned to their normal positions and the shoe and lining assemblies are properly seated.
Do not shake the pressure bleeder tank while air is being added or after it has been pressurized. This will prevent air from the tank getting into the lines. Do not move the tank during the bleeding operation. The tank should be kept at least one third full.
On models equipped with power brakes, exhaust the...
CLICK HERE TO GET FULL ACCESS TO 1999 Mercury Mystique BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mercury Mystique AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mercury Mystique cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assemble -> Continental, Cougar, Crown Victoria, Grand Marquis, LS, Marauder, Mustang (Except Cobra), Sable, Taurus, Thunderbird & Town Car -> Contour & Mystique -> Disassemble -> Escort, Tracer & ZX2 -> Focus -> Inspection -> Mustang Cobra -> Overhaul -> Replacement
Vehicle: 1999 Mercury Mystique 2.5 V6 GAS
Replacement
On models with anti-lock brakes, the brake booster system must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal a minimum of 25 times with the ignition in the Off position.
Continental, Cougar, Crown Victoria, Grand Marquis, LS, Marauder, Mustang (Except Cobra), Sable, Taurus, Thunderbird & Town Car
Before removing calipers, mark lefthand and righthand calipers so they can be installed in the same position.
- On models equipped with air suspension, turn air suspension service switch to Off position.
- On...
CLICK HERE TO GET FULL ACCESS TO 1999 Mercury Mystique BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mercury Mystique AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mercury Mystique cars and light trucks from 1990+.
Drum Brakes -> Contour, Cougar, Mystique, Sable & Taurus -> Precautions -> Battery Ground Cable -> Safety Precautions
Vehicle: 1999 Mercury Mystique 2.5 V6 GAS
Battery Ground Cable
Prior to service, disconnect battery ground cable and isolate as required.
Safety Precautions
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations the amount of asbestos dust from brake lining wear is at a low level, due to a chemical breakdown during use. A few precautions will minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent ...
CLICK HERE TO GET FULL ACCESS TO 1999 Mercury Mystique BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mercury Mystique AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mercury Mystique cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Specifications
Vehicle: 1999 Mercury Mystique 2.5 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1999 Mercury Mystique BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mercury Mystique AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mercury Mystique cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assemble -> Continental, Cougar, Crown Victoria, Grand Marquis, LS, Marauder, Mustang (Except Cobra), Sable, Taurus, Thunderbird & Town Car -> Contour & Mystique -> Disassemble -> Escort, Tracer & ZX2 -> Focus -> Inspection -> Mustang Cobra -> Overhaul -> Replacement
Vehicle: 1999 Mercury Mystique 2.0 L4 GAS
Replacement
On models with anti-lock brakes, the brake booster system must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal a minimum of 25 times with the ignition in the Off position.
Continental, Cougar, Crown Victoria, Grand Marquis, LS, Marauder, Mustang (Except Cobra), Sable, Taurus, Thunderbird & Town Car
Before removing calipers, mark lefthand and righthand calipers so they can be installed in the same position.
- On models equipped with air suspension, turn air suspension service switch to Off position.
- On...
CLICK HERE TO GET FULL ACCESS TO 1999 Mercury Mystique BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mercury Mystique AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mercury Mystique cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> System Priming -> Wheel Bleeding Sequence
Vehicle: 1999 Mercury Mystique 2.0 L4 GAS
Pressure bleeding is recommended for all hydraulic brake systems. Ensure all dirt and contaminants are removed from master cylinder area prior to removing reservoir cap.
To prevent air from the pressure tank getting into the lines, do not shake the tank while air is being added to the tank or after it has been pressurized. Set the tank in the required location, bring the air hose to the tank, and do not move it during the bleeding operation. The tank should be kept at least one-third full.
On vehicles equipped with disc brakes and master cylinders without proportioners or press...
CLICK HERE TO GET FULL ACCESS TO 1999 Mercury Mystique BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Mercury Mystique vehicle.
|
| Access the Complete guide! |
