Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Suzuki Vitara car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Suzuki Vitara automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Suzuki Vitara
- 1999 Suzuki Vitara 1.6 L4 GAS, CC:1590, CID:97, Fuel Injection, Aspiration:97, Engine VIN:, Desg:0
- 1999 Suzuki Vitara 2.0 L4 GAS, CC:2000, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Vitara AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Vitara cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Brake Drum, Replace -> Brake Shoe, Replace -> Esteem -> Esteem & Swift -> Grand Vitara, Sidekick, Vitara & X-90 -> Swift -> Wheel Cylinder, Replace
Vehicle: 1999 Suzuki Vitara 2.0 L4 GAS
Brake Drum, Replace
Esteem
- Raise and support vehicle, then remove wheel.
- Remove drum screws.
- Release parking brake lever.
- Remove parking brake lever cover, then loosen parking brake cable locking nut.
- To increase clearance between shoe and drum, proceed as follows:
- Remove backing plate plug.
- Insert screwdriver into plug hole till its tip contacts shoe hold-down spring, then push hold-down spring as shown, Fig. .
- Remove brake drum by fitting two 8 mm bolts into holes on drum and extracting drum off wheel hub.
- Reverse procedure to install, noting the following:
- Before installing drum, maximize...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Vitara BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Vitara AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Vitara cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> Brake Fluid Leakage Inspection -> Road Test -> Substandard Or Contaminated Brake Fluid
Vehicle: 1999 Suzuki Vitara 1.6 L4 GAS
Road Test
Brakes should be tested on dry, clean, smooth and reasonable level roadway which is not crowned. Road test brakes by making brake applications with both light and heavy pedal forces at various speeds to determine if car stops evenly and effectively.
Also road test vehicle to see if it pulls to one side without brake application. If it does, check tire pressure, front end alignment and front suspension attachments for looseness.
Brake Fluid Leakage Inspection
Check master cylinder fluid levels. While a slight drop in reservoir level does result from normal lining wear, ...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Vitara BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Vitara AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Vitara cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Brake Pedal Height -> Brake Pedal Travel Inspection
Vehicle: 1999 Suzuki Vitara 1.6 L4 GAS
Brake Pedal Height
The brake pedal should be at the same height as clutch pedal. Ensure distance between brake booster mounting surface (with gasket) and pushrod clevis pin hole is as follows:
- On Esteem and Swift models, 4.51-4.54 inches (114.5-115.5 mm).
- On Grand Vitara and Vitara models, 7.60-7.99 inches (193-203 mm) for 1999 and 8.19-8.58 inches (208-218) for 2000-02.
- On Sidekick and X-90 models, 6.60-6.64 inches (167.6-168.6 mm)
Brake Pedal Travel Inspection
- Start engine, then depress brake pedal a few times.
- Apply ap...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Vitara BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Vitara AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Vitara cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting
Vehicle: 1999 Suzuki Vitara 1.6 L4 GAS
Refer to "Diagnosis & T... "
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Vitara BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Vitara AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Vitara cars and light trucks from 1990+.
Power Brake Units -> Description
Vehicle: 1999 Suzuki Vitara 1.6 L4 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydraulic pres...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Vitara BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Vitara AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Vitara cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Esteem & Swift -> Grand Vitara, Sidekick, Vitara & X-90 -> Master Cylinder -> System Bleed
Vehicle: 1999 Suzuki Vitara 2.0 L4 GAS
Brake fluid is extremely damaging to paint. If fluid should accidentally touch painted surface, immediately wipe fluid from paint and clean painted surface.
System Bleed
Esteem & Swift
The hydraulic lines of the brake system are based on a diagonal split system. When a brake line or hose is disconnected, bleeding operation must be performed at both ends of the line disconnected.
- Fill master cylinder reservoir. Reservoir should be kept at least half full during bleeding operation.
- Remove bleeder plug cap, then attach vinyl tube to bleeder plug of component to be bled. Insert other ...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Vitara BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Suzuki Vitara vehicle.
|
| Access the Complete guide! |
