Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Volkswagen Passat car and truck
repair procedures including Volkswagen engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Volkswagen Passat automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Volkswagen Passat
- 1999 Volkswagen Passat 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:A
- 1999 Volkswagen Passat 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:D
- 1999 Volkswagen Passat 2.8 V6 GAS, CC:2771, Fuel Injection
- 1999 Volkswagen Passat 1.8 L4 GAS, CC:1781, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Volkswagen Passat AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Volkswagen Passat cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Volkswagen Passat 2.8 V6 GAS
- Raise and support vehicle.
- Remove rear section of exhaust system.
- Remove heat shield from vehicle underbody.
- Remove cover plate.
- Mark position of front and rear drive shaft sections on both constant velocity joints with paint, if not already marked.
- Remove upper three securing bolts in each drive shaft constant velocity joint.
- Install a suitable alignment fixture with ...
CLICK HERE TO GET FULL ACCESS TO 1999 Volkswagen Passat DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Volkswagen Passat AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Volkswagen Passat cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Volkswagen Passat 2.8 V6 GAS
- Raise and support vehicle.
- Remove rear section of exhaust system.
- Remove heat shield from vehicle underbody.
- Remove cover plate.
- Mark position of front and rear drive shaft sections on both constant velocity joints with paint, if not already marked.
- Remove upper three securing bolts in each drive shaft constant velocity joint.
- Install a suitable alignment fixture with ...
CLICK HERE TO GET FULL ACCESS TO 1999 Volkswagen Passat DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Volkswagen Passat AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Volkswagen Passat cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Volkswagen Passat 2.8 V6 GAS
- Raise and support vehicle.
- Remove rear section of exhaust system.
- Remove heat shield from vehicle underbody.
- Remove cover plate.
- Mark position of front and rear drive shaft sections on both constant velocity joints with paint, if not already marked.
- Remove upper three securing bolts in each drive shaft constant velocity joint.
- Install a suitable alignment fixture with ...
CLICK HERE TO GET FULL ACCESS TO 1999 Volkswagen Passat DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Volkswagen Passat AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Volkswagen Passat cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Volkswagen Passat 1.8 L4 GAS
- Raise and support vehicle.
- Remove rear section of exhaust system.
- Remove heat shield from vehicle underbody.
- Remove cover plate.
- Mark position of front and rear drive shaft sections on both constant velocity joints with paint, if not already marked.
- Remove upper three securing bolts in each drive shaft constant velocity joint.
- Install a suitable alignment fixture with ...
CLICK HERE TO GET FULL ACCESS TO 1999 Volkswagen Passat DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Volkswagen Passat vehicle.
|
| Access the Complete guide! |
