Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Ford Ranger car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Ford Ranger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Ford Ranger
- 2000 Ford Ranger 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:X
- 2000 Ford Ranger 2.5 L4 GAS, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:C
- 2000 Ford Ranger L ELECTRIC, Engine VIN:, Desg:1
- 2000 Ford Ranger 3.0 V6 FLEX, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:V
BRAKE SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+.
Drum Brakes -> Expedition, Explorer, E-150, F-150, F-250LD, Mountaineer, Navigator & Ranger -> Tightening Specifications
Vehicle: 2000 Ford Ranger 4.0 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Precautions -> Brake Bleed -> Brake Disc Service -> Brake Linings -> Brake Roughness -> Caliper Inspection -> General Precautions
Vehicle: 2000 Ford Ranger 2.5 L4 GAS
Brake Linings
Remove both front wheels and inspect the brake discs, calipers and linings. (Wheel bearings should be inspected at this time and repacked if necessary).
Do not get any oil or grease on the linings. It is recommended that both front wheel sets be replaced whenever a respective shoe and lining is worn or damaged. Inspect and, if necessary, replace rear brake linings also.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of ...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Aerostar, Escape, E-Series, Excursion, F-250HD, F-350, F-Super Duty, Ranger & Villager -> Bendix Hydro-Max -> Expedition, Explorer, F-150, F-250LD, Mountaineer, Navigator & Windstar -> Manual Bleed -> Pressure Bleed
Vehicle: 2000 Ford Ranger 4.0 V6 GAS
Aerostar, Escape, E-Series, Excursion, F-250HD, F-350, F-Super Duty, Ranger & Villager
Bleed primary and secondary hydraulic brake systems separately, bleeding the longest line first on each system. Do not allow reservoir to run dry during bleeding operation. Never use fluid that has been drained from the hydraulic system. Ensure proper bleed sequence is followed.
On 1997-98 Villager models, the bleed sequence is lefthand front, righthand front, lefthand rear, righthand rear.
On Aerostar, E-Series, Escape, Excursion, F-250HD, F-350, F-Super Duty, Ranger and 1999-2001 Vill...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> 1997 F-Super Duty -> E-Super Duty -> Expedition, Explorer, Navigator, Mountaineer & F-250LD -> Parking Brake -> Rear Disc -> Transmission Mounted -> Windstar
Vehicle: 2000 Ford Ranger 2.5 L4 GAS
Parking Brake
Expedition, Explorer, Navigator, Mountaineer & F-250LD
Rear Disc
- Remove rear disc brake rotor as outlined in "Rotor, Replace".
- Using brake adjustment gauge tool No. D81L-1103-A, or equivalent, to measure inside diameter of parking brake drum, Fig. .
- Using parking brake adjuster screw, adjust parking brake shoe to .020 inch (.508 mm) less than drum measurement, Fig. .
- Reverse procedure to install.
1997 F-Super Duty
Transmission Mounted
- Place transmission in neutral position and release parking brake, then raise and support vehicle.
- Loosen parking brake adjusting clevis locknut sev...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> 1997 -> 1999-2001 -> Aerostar -> Assemble -> Cleaning & Inspection -> Disassemble -> E-150 -> Escape -> Expedition, Navigator, E-250, E-350, F-250HD, F-350, F-Super Duty, F-150 & F-250LD -> Expedition, Navigator, E-Series, F-150 & F-250LD -> Explorer, Mountaineer & Ranger -> F-250HD, F-350, E-Super Duty & F-Super Duty Series -> Front -> Inspection -> Overhaul -> Rear -> Replacement -> Villager -> Villager & Windstar -> Windstar
Vehicle: 2000 Ford Ranger 4.0 V6 GAS
Replacement
Aerostar
- Remove and discard a portion of brake fluid from master cylinder.
- Raise and support vehicle, then remove wheel and tire assembly.
- Use an eight inch c-clamp to move piston back into its bore as follows:
- Place head of c-clamp against caliper and screw end of c-clamp against outer pad below spring clip.
- Tighten c-clamp until torque buttons just clear caliper (approximately 1/8 inch). Remove c-clamp.
- Clean excess dirt from around pin tabs, then use caliper pin remover tool No. D89T-2196-A, or equivalent, and light hammer to drive caliper pin from caliper as follows:
- Po...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 2000 Ford Ranger 2.5 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Ford Ranger vehicle.
|
| Access the Complete guide! |
