Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Honda Prelude car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Honda Prelude automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Honda Prelude
- 2000 Honda Prelude 2.2 L4 GAS, CC:2156, Fuel Injection
- 2000 Honda Prelude SH 2.2 L4 GAS, CC:2156, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Honda Prelude AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Honda Prelude cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Honda Prelude SH 2.2 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Lift up locking tab on spindle nut then remove nut.
- On models equipped with ATTS, remove cotter pin from radius rod ball joint castle nut and remove nut.
- Install 14 mm hex nut on ball joint and ensure nut is flush with ball joint pin end.
- Remove self-locking nut and flange bolts from dampner fork.
- Remove dampner fork.
- Remove cotter pin from radius rod ball joint c...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Prelude DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Honda Prelude AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Honda Prelude cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Honda Prelude 2.2 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Lift up locking tab on spindle nut then remove nut.
- On models equipped with ATTS, remove cotter pin from radius rod ball joint castle nut and remove nut.
- Install 14 mm hex nut on ball joint and ensure nut is flush with ball joint pin end.
- Remove self-locking nut and flange bolts from dampner fork.
- Remove dampner fork.
- Remove cotter pin from radius rod ball joint c...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Prelude DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



