Auto Parts Search
2000 Saab 9-5 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Saab REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
A/C & HEATER SERVICE PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Electrical Symbol & Wire Color Code Identification -> Electrical Symbol Identification -> Imported Vehicles
Vehicle: 2000 Saab 9-5 2.3 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Hydraulic Brake Systems -> Brake System Bleed -> 9-3 & 900 -> 9-5 -> 9000
Vehicle: 2000 Saab 9-5 3.0 V6 GAS
9-3 & 900
- Unscrew cover of brake fluid reservoir and top off with brake fluid.
- Connect topping-off fitting from brake bleeding unit kit tool No. 88 19 096, or equivalent, to brake fluid reservoir.
- Position hose with one end on topping-off fitting and other end in bottle filled with clean brake fluid.
- Raise and support vehicle, then connect brake bleeder hose to front left wheel and open nipple. Draw off approximately .1 quart brake fluid. Repeat at front right wheel.
- Move brake bleeder to rear left wheel and open nipple. Draw off approximately.05 quart brake fluid. Repeat at rear ...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Saab -> Fuel Filter Replacement -> 9-5 -> Fuel System Pressure Relief -> Installation -> Removal
Vehicle: 2000 Saab 9-5 3.0 V6 GAS
Fuel System Pressure Relief
- Remove fuel pump fuse No. 19 from the instrument panel fuse box.
- Start the engine and run until it stalls.
- Turn the ignition Off.
- Disconnect the battery ground cable.
- Install the fuel pump fuse.
Removal
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental fuel spray.
- Relieve fuel pressure as outlined under...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2000 Saab 9-5 3.0 V6 GAS
- Remove dust cap and loosen hub center nut, Fig. . Do not completely remove nut.
- Raise and support vehicle, then remove wheel.
- Remove hub center nut, then ball joint nut.
- Remove ball joint using a suitable ball joint tool.
- Remove anti-roll bar nut and collect washer and rubber bushing.
- Press spring link down.
- Tap driveshaft out of hub using rubber mallet, then move MacPherson strut aside and pull out d...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Alternator, Replace
Vehicle: 2000 Saab 9-5 2.3 L4 GAS
- Remove battery ground cable at battery.
- Remove shield over intake manifold.
- Remove crankcase ventilation solenoid and constant-pressure valves.
- Relieve tension on belt tensioner and remove it.
- Remove alternator's upper retaining bolt.
- Mark and detach retaining nut on righthand engine mounting and lubricate it to give it some mobility.
- Detach retaining nut on ...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Cabin Air Filter Service -> Saab -> 1999-2004 9-5
Vehicle: 2000 Saab 9-5 Aero 2.3 L4 GAS
The cabin air filter should be replaced every 30,000 miles. The filter should be replaced more often if air flow is less than normal.
- Disconnect the battery ground cable.
- Remove the console passenger side cover, Fig. .
- Remove the glove compartment retaining screw, then disengage the retaining clips and lift the glove compartment from the instrument panel.
- Disconnect the glove compartment...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Saab -> Air Bag Warning Lamp ->
Vehicle: 2000 Saab 9-5 Aero 2.3 L4 GAS
The air bag warning lamp informs the driver when a fault occurs in the air bag system. If a fault is detected, then air bag warning...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Radiator, Replace
Vehicle: 2000 Saab 9-5 Aero 2.3 L4 GAS
- Open cap on expansion tank and release pressure.
- Raise car.
- Remove front lower cover.
- Drain coolant from radiator.
- Lower car to floor.
- Undo hose clip on upper radiator hose.
- Remove fan assembly.
- For models with automatic transmission, also remove connections to oil cooler on transmission.
- NOTE: Have a receptacle handy to catch any fluid spill.
- ...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2000 Saab 9-5 AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2000 Saab 9-5 2.3 L4 GAS
- Rotate or lift the belt tensioner arm, using a suitable tool to relieve tension from dr...
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 2000 Saab 9-5 AUTOMOBILES
Component location diagrams for most 2000 Saab 9-5 cars and light trucks sold in the U.S. from 1990+.
Engine Compartment Relay Locations Diagram for 2000 Saab 9-5 Aero 2.3 L4 GAS Components on diagram: |
I/P Relay Locations Diagram for 2000 Saab 9-5 2.3 L4 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 2000 Saab 9-5 AUTOMOBILES
OEM drawn wiring diagrams for most 2000 Saab 9-5 cars and light trucks sold in the U.S.
2000 Saab 9-5 3.0 V6 GAS Wiring Diagram Components on diagram: |
2000 Saab 9-5 Aero 2.3 L4 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2000 Saab 9-5 AUTOMOBILES
OEM TSB listings for most 2000 Saab 9-5 cars and light trucks sold in the U.S. from 1985+.
Document: New Website for AFIT, TPM, and VDR Updates Vehicle: 2000 Saab 9-5 3.0 V6 GAS Auto Systems: |
Document: EVAP Emissions Small Leak Diagnosis (DTC P0442) Vehicle: 2000 Saab 9-5 3.0 V6 GAS Symptoms: |
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2000 Saab 9-5 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2000 Saab 9-5 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2000 Saab 9-5 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2000 Saab 9-5 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2000 Saab 9-5 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2000 Saab 9-5 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Saab 9-5 vehicle. |
Access the Complete guide! |