Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Volkswagen Jetta car and truck
repair procedures including Volkswagen engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Volkswagen Jetta automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Volkswagen Jetta
- 2000 Volkswagen Jetta GL 2.0 L4 GAS, CC:1984, Fuel Injection
- 2000 Volkswagen Jetta GLS 2.0 L4 GAS, CC:1984, Fuel Injection
- 2000 Volkswagen Jetta GLS 2.8 V6 GAS, CC:2792, Fuel Injection
- 2000 Volkswagen Jetta GLS 1.8 L4 GAS, CC:1781, Fuel Injection
- 2000 Volkswagen Jetta GLS 1.8 L4 GAS, CC:1781, Fuel Injection
- 2000 Volkswagen Jetta GLX 2.8 V6 GAS, CC:2792, Fuel Injection
- 2000 Volkswagen Jetta TDI 1.9 L4 DIESEL, CC:1896, CID:116, Fuel Injection, Aspiration:116
BRAKE SERVICE PROCEDURES FOR 2000 Volkswagen Jetta AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Volkswagen Jetta cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Conventional Bleed -> Pressure Bleed -> Scan Tool Bleed
Vehicle: 2000 Volkswagen Jetta GLS 1.8 L4 GAS
Conventional Bleed
- Connect suitable bottle with transparent hose to each wheel.
- Pump brake pedal several times, then hold.
- Open and close bleeder screw, then release pedal.
- Bleed brake system using the following sequence:
- Righthand rear caliper/wheel cylinder.
- Lefthand rear caliper/wheel cylinder.
- Righthand front caliper.
- Lefthand front caliper.
- Repeat procedure until brake fluid flows without air bubbles.
Pressure Bleed
- Connect brake filling and bleeding unit tool No. US 1116, or equivalent.
- On models equipped with brake pressure regu...
CLICK HERE TO GET FULL ACCESS TO 2000 Volkswagen Jetta BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Volkswagen Jetta AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Volkswagen Jetta cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Bosch 5 -> Bosch 5.3 -> Brake System Bleed -> Cabrio, Golf, GTI, Jetta & New Beetle -> Coding Control Module -> Component Replacement -> Control Module -> EuroVan -> Hydraulic Modulator -> ITT Mark 20 IE -> Passat -> Teves Type 04 -> Teves Type 20
Vehicle: 2000 Volkswagen Jetta GLS 2.8 V6 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems" for bleeding procedure.
Component Replacement
Bosch 5.3, ITT Mark 20 and Teves model 20 ABS control modules are coded to the vehicle. Replacement control modules must be coded after installation. Refer to "Coding Control Module" for procedures.
Prior to servicing the ABS system, always turn the ignition off.
The ABS control unit must never be exposed to temperatures greater than 185°F for more than two hours, or 203°F for even short time periods. The ABS control unit must be unplugged if an electric welder is to be used on the vehicle.
...
CLICK HERE TO GET FULL ACCESS TO 2000 Volkswagen Jetta BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Volkswagen Jetta AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Volkswagen Jetta cars and light trucks from 1990+.
Disc Brakes -> Girling/Lucas Single Piston w/Dual Mounting Bolts, Front -> Brake Pad Service
Vehicle: 2000 Volkswagen Jetta GLS 1.8 L4 GAS
Always remove some brake fluid from master cylinder reservoir prior to installing new pads. When caliper piston is pushed back, fluid is forced out of caliper and into reservoir. After pads are installed and seated, fill reservoir to MAX mark.
- Raise and support vehicle, then remove front wheels.
- Using open end wrench to hold guide pin head, Fig. , remove lower caliper mounting bolt.
- Swing caliper upward, then remove brake pads.
- Pu...
CLICK HERE TO GET FULL ACCESS TO 2000 Volkswagen Jetta BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Volkswagen Jetta AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Volkswagen Jetta cars and light trucks from 1990+.
Disc Brakes -> Single Piston Rear Disc Brake -> Caliper Service -> Overhaul
Vehicle: 2000 Volkswagen Jetta GL 2.0 L4 GAS
Overhaul
Refer to Fig. when servicing caliper.
- Secure caliper in a suitable soft-jawed vise, then remove piston from bore by turning counterclockwise with caliper piston seating tool No. 3272, or equivalent, Fig. .
- Pry piston seals from groove being careful not to score the piston bore.
- Slid...
CLICK HERE TO GET FULL ACCESS TO 2000 Volkswagen Jetta BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Volkswagen Jetta AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Volkswagen Jetta cars and light trucks from 1990+.
Disc Brakes -> Single Piston Rear Disc Brake -> Caliper Service -> Overhaul
Vehicle: 2000 Volkswagen Jetta GLS 2.8 V6 GAS
Overhaul
Refer to Fig. when servicing caliper.
- Secure caliper in a suitable soft-jawed vise, then remove piston from bore by turning counterclockwise with caliper piston seating tool No. 3272, or equivalent, Fig. .
- Pry piston seals from groove being careful not to score the piston bore.
- Slid...
CLICK HERE TO GET FULL ACCESS TO 2000 Volkswagen Jetta BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Volkswagen Jetta AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Volkswagen Jetta cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Conventional Bleed -> Pressure Bleed -> Scan Tool Bleed
Vehicle: 2000 Volkswagen Jetta GL 2.0 L4 GAS
Conventional Bleed
- Connect suitable bottle with transparent hose to each wheel.
- Pump brake pedal several times, then hold.
- Open and close bleeder screw, then release pedal.
- Bleed brake system using the following sequence:
- Righthand rear caliper/wheel cylinder.
- Lefthand rear caliper/wheel cylinder.
- Righthand front caliper.
- Lefthand front caliper.
- Repeat procedure until brake fluid flows without air bubbles.
Pressure Bleed
- Connect brake filling and bleeding unit tool No. US 1116, or equivalent.
- On models equipped with brake pressure regu...
CLICK HERE TO GET FULL ACCESS TO 2000 Volkswagen Jetta BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
