Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Chevrolet Venture car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Chevrolet Venture automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2001 Chevrolet Venture AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Chevrolet Venture cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Delco Master Cylinder -> Disassemble -> Tracker Master Cylinder -> Wheel Cylinder
Vehicle: 2001 Chevrolet Venture 3.4 V6 GAS
Delco Master Cylinder
When performing the following procedures, refer to Figs. and noting that the composite reservoir may vary in design.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then apply compressed air into secondary fluid outlet t...
CLICK HERE TO GET FULL ACCESS TO 2001 Chevrolet Venture BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Chevrolet Venture AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Chevrolet Venture cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Power Brake Unit Service
Vehicle: 2001 Chevrolet Venture 3.4 V6 GAS
The power brake unit is n...
CLICK HERE TO GET FULL ACCESS TO 2001 Chevrolet Venture BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Chevrolet Venture AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Chevrolet Venture cars and light trucks from 1990+.
Anti-lock Brakes -> Delphi Type VI -> System Service -> 1997-99 Montana, Silhouette, Trans Sport & Venture -> 2000-01 Montana, Silhouette & Venture -> ABS Lamp Driver Module -> Accelerometer -> Brake Modulator/Master Cylinder Assembly -> Brake Solenoid Valve -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module/Electronic Brake Traction Control Module (EBCM/EBTCM) -> Front Wheel Speed Sensor -> Front Wheel Speed Sensor Jumper Harness -> Manual Bleeding -> Montana, Silhouette, Trans Sport & Venture -> Pressure Bleeding -> Rear Wheel Speed Sensor -> Rear Wheel Speed Sensor Jumper Harness -> Tracker -> Traction Control System (TCS) Modulator/Motor Pack
Vehicle: 2001 Chevrolet Venture 3.4 V6 GAS
Brake System Bleed
Pressure Bleeding
Montana, Silhouette, Trans Sport & Venture
- Remove master cylinder cover, ensure reservoir is properly filled.
- Connect bleeder adapter tool No. J 35589, or equivalent, to master cylinder reservoir.
- Connect bleeder adapter to pressure bleeding equipment.
- Connect a clear plastic bleeder hose to modulator assembly rearward bleeder valve, submerge other end of hose into clean container partially filled with brake fluid.
- Adjust pressure bleeding equipment to 5-10 psi, then wait for approximately 30 seconds to ensure there is no leakage.
- Adjust pressure blee...
CLICK HERE TO GET FULL ACCESS TO 2001 Chevrolet Venture BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Chevrolet Venture AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Chevrolet Venture cars and light trucks from 1990+.
Drum Brakes -> Inspection -> Adjuster Mechanism -> Backing Plate -> Brake Drums -> Brake Linings & Springs -> General System -> Parking Brake Cable
Vehicle: 2001 Chevrolet Venture 3.4 V6 GAS
General System
- Inspect components for damage or unusual wear. Replace as required.
- Inspect backing plate mounting bolts and ensure they are tight.
- Inspect wheel cylinders. Excessive fluid indicates cup leakage and need for wheel cylinder replacement. Slight amount of fluid is always present and is considered normal, acting as lubricant for cylinder pistons.
- Check adjuster screw operation. If satisfactory, lightly lubricate adjusting screw and washer with suitable brake lube. If operation is unsatisfactory, replace.
- C clean rust and dirt from shoe contact surfaces on backing plate using fi...
CLICK HERE TO GET FULL ACCESS TO 2001 Chevrolet Venture BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Chevrolet Venture AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Chevrolet Venture cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Brake Pad Service -> Installation -> Removal
Vehicle: 2001 Chevrolet Venture 3.4 V6 GAS
Removal
- Remove caliper as outlined under "Caliper Service."
- Remove inboard pad with retainer spring.
- Remove outboard pad and position caliper on front suspension so brake hose will not support weight of caliper.
- Remove two sleeves from inboard ears of caliper.
- Remove four rubber bushings from grooves in each of caliper ears.
Installation
- Lubricate new sleeves, rubber bushings, bushing grooves and mounting bolt ends with lubricant part No. 19010909, or equivalent.
- Install new bushings and sleeves in caliper e...
CLICK HERE TO GET FULL ACCESS TO 2001 Chevrolet Venture BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Chevrolet Venture AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Chevrolet Venture cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 2001 Chevrolet Venture 3.4 V6 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating in-line. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check val...
CLICK HERE TO GET FULL ACCESS TO 2001 Chevrolet Venture BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
