Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Mazda Protege car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Mazda Protege automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 Mazda Protege
- 2001 Mazda Protege 1.6 L4 GAS, CC:1589, Fuel Injection, Engine VIN:, Desg:0
- 2001 Mazda Protege 2.0 L4 GAS, CC:2000, Fuel Injection
- 2001 Mazda Protege MP3 2.0 L4 GAS, CC:2000, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2001 Mazda Protege AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda Protege cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Check Valve -> Function Check -> Load Test
Vehicle: 2001 Mazda Protege 2.0 L4 GAS
Function Check
- Stop engine and depress brake pedal a few times to relieve vacuum.
- With pedal depressed, start engine. After starting engine, pedal should move down slightly. If so, unit is functioning.
- After engine has run two minutes, turn it off. Depress pedal with normal force.
- If the first pedal stroke is long and gets shorter with subsequent strokes, the unit is operating. If a problem is found, inspect check valve, vacuum hose and installation. Repair if required and inspect again.
- Start engine and depress pedal with usual force.
- Stop engine with pedal still depressed. Hold peda...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda Protege BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda Protege AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda Protege cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1997-98 -> 2000-01 -> 2WD -> 4WABS -> 4WD -> ABS Control Module -> ABS Relay -> B-Series -> Brake System Bleed -> Component Replacement -> Computer Module -> Front Wheel Speed Sensor -> Front Wheel Speed Sensor Rotor -> Hydraulic Unit -> Miata -> Millenia -> Millenia & Protege -> MPV -> MX-6 & 626 -> Rear -> Rear Anti-Lock Brake System (RABS) Sensor -> Rear Anti-Lock Brake System (RABS) Valve -> Rear Wheel Speed Sensor -> Rear Wheel Speed Sensor Rotor -> Tribute
Vehicle: 2001 Mazda Protege 2.0 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake System" for bleed procedure.
Component Replacement
ABS Relay
Millenia & Protege
- Remove cruise control actuator assembly, then disconnect relay electrical connector.
- Remove relay mounting nut, then the relay.
- Reverse procedure to install. Torque relay mounting nut to 70-95 inch lbs. and cruise control actuator mounting nuts to 26-34 inch lbs.
Hydraulic Unit
B-Series
4WABS
- Raise and support vehicle, then remove left front wheel and fender apron.
- Remove hydraulic unit nut, then lower vehicle and remove unit.
- Reverse procedure to install, noting the foll...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda Protege BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda Protege AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda Protege cars and light trucks from 1990+.
Drum Brakes -> Brake Service
Vehicle: 2001 Mazda Protege 2.0 L4 GAS
For brake drum and brake shoe replacement procedures, r...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda Protege BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda Protege AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda Protege cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Tribute -> Master Cylinder -> Tribute
Vehicle: 2001 Mazda Protege 1.6 L4 GAS
Master Cylinder
Except Tribute
- Disconnect brake fluid level sensor.
- Disconnect and cap brake fluid lines from master cylinder using Line Wrench tool No. 49-0259-770 A/B, or equivalent.
- Remove proportioning bypass valve attaching bolts and valve, if equipped.
- Remove bracket, if equipped, then the master cylinder assembly from the power brake booster.
- Reverse procedure to install, noting the following:
- On all models except B-Series, torque master cylinder nuts to 8-12 ft. lbs.
- On B-Series models, torque master cylinder nuts to 14-21 ft. lbs.
- On all models, bleed brake system.
Tribute
- D...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda Protege BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda Protege AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda Protege cars and light trucks from 1990+.
Anti-lock Brakes -> Precautions -> Audio Coded Anti-Theft System -> Battery Ground Cable
Vehicle: 2001 Mazda Protege MP3 2.0 L4 GAS
Battery Ground Cable
Prior to service, disconnect battery ground cable and isolate as required.
Audio Coded Anti-Theft System
The audio system's anti-theft feature renders the system inoperable after power to the audio unit has been interrupted. Obtaining the anti-theft security code prior to performing repairs will ensure restoration of audio system operation in case the vehicle battery is disconnected or power to the audio unit is otherwise lost during repairs.
Always obtain the security code before interrupting power to the audio unit. To reactivate the unit after power is restored, ...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda Protege BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda Protege AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda Protege cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting -> 1997 -> 1997-98 -> 1998-2001 -> 1999-2001 -> 2000-01 -> B-Series -> Miata -> Millenia -> MPV -> MX-6 & 626 -> Protege -> Tribute
Vehicle: 2001 Mazda Protege 2.0 L4 GAS
B-Series
1997
Refer to Fig. , for diagnostic index and Fig. , for Rear ABS (RABS) troubleshooting flow charts.
1998-2001
Refer to Fig. , for diagnostic index and Figs. through , for ABS (RABS & 4WABS) troubleshooting flow charts.
Miata
1997
Refer to Figs. through , for troubleshooting charts.
1999-2001
[[table data]]Millenia
Refer to Fig. , for diagnostic index,...
[[table data]] [[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 2001 Mazda Protege BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
