Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chevrolet Venture car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Chevrolet Venture automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet Venture AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet Venture cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2002 Chevrolet Venture 3.4 V6 GAS
Front
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove engine splash shield.
- Insert a drift or punch through brake caliper and into brake rotor in order to prevent wheel hub and bearing from turning.
- Remove wheel drive shaft spindle nut.
- Remove stabilizer shaft link.
- Disconnect outer tie rod end from steering knuckle. Do not loosen tie rod end jam nut.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J42129 or equivalent o...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Venture DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet Venture AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet Venture cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2002 Chevrolet Venture 3.4 V6 GAS
- Raise and support vehicle.
- Place reference marks on propeller shaft at transfer case flange.
- Remove propeller shaft-to-transfer case flange bolts.
- Reference mark propeller shaft at torque tube flange.
- Remove propeller shaft-to-torque tube f...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Venture DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Chevrolet Venture vehicle.
|
| Access the Complete guide! |




