Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Dodge Durango car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Dodge Durango automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Dodge Durango
- 2002 Dodge Durango 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
- 2002 Dodge Durango 4.7 V8 GAS, CID:285, Fuel Injection, Aspiration:285, Engine VIN:, Desg:N
SERPENTINE BELT SERVICE PROCEDURES FOR 2002 Dodge Durango AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2002 Dodge Durango cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2002 Dodge Durango 4.7 V8 GAS
Belt tension is not adjustable. Belt adjustment is maintained by automatic (spring load) belt tensioner. Do not let tensioner arm snap back to freearm position, severe damage may occur t...
CLICK HERE TO GET FULL ACCESS TO 2002 Dodge Durango SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2002 Dodge Durango AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2002 Dodge Durango cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 2002 Dodge Durango 5.9 V8 GAS
Removal
The automatic tensioner is equipped with an indexing arrow on the back of tensioner housing. If a new belt is being installed, arrow must be within approximately 1/8 inch of indexing mark. If an old belt is being used, it must not pass the indexing point.
- Attach a suitable wrench to automatic tensioner pulley mounting bolt.
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller...
CLICK HERE TO GET FULL ACCESS TO 2002 Dodge Durango SERPENTINE BELT SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Dodge Durango vehicle.
|
| Access the Complete guide! |
