Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Ford Escape car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Ford Escape automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Ford Escape
- 2003 Ford Escape 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:1
- 2003 Ford Escape 2.0 L4 GAS, CC:1989, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:B
BRAKE SERVICE PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Anti-Lock Brakes -> Escape & Mariner -> Precautions -> Brake Fluid Handling -> High-Voltage Traction Battery Systems Depowering
Vehicle: 2003 Ford Escape 2.0 L4 GAS
Brake Fluid Handling
Brake fluid can cause serious injury and vehicle damage if not handled properly. Avoid contact with eyes and do not allow fluid to splash or spill on painted surfaces. Wash hands thoroughly after handling.
High-Voltage Traction Battery Systems Depowering
The nominal high voltage traction battery (HVTB) voltage is 330 volts DC. The buffer zone must be set up. The high voltage traction battery and charging system contains high voltage components and wiring. High voltage cables and wiring are orange in color. High voltage insulated safety gloves and a face shield must...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Drum Brakes -> Escape, Villager & Windstar -> Brake Service -> Escape -> Villager -> Windstar
Vehicle: 2003 Ford Escape 3.0 V6 GAS
Escape
- Raise and support vehicle.
- Remove rear tire and wheel assemblies.
- Remove brake drum retaining clips, if equipped.
- If brake drums will not come off, move brake shoe adjusting lever of brake adjuster screw, then loosen brake shoe adjuster nut.
- Remove brake dust and dirt from assemblies with brake/clutch service vacuum.
- If new shoes are to be installed, resurface rear brake drums.
- Remove parking brake cable from parking brake cable lever.
- Remove hold down clips and pins.
- Remove lower spring.
- Pull bottom of brake shoe forward, then release upper return spring.
- Remove self adjuster lever a...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Disc Brakes -> Troubleshooting -> Brake Noise -> Brake Pedal Eases Down Slowly -> Brake Pedal Goes Down Fast -> Brakes Drag -> Brakes Lock Up During Light Brake Pedal Force -> Brakes Pull Or Drift -> Excessive Brake Pedal Effort -> Excessive Or Erratic Brake Pedal Travel -> Red Brake Warning Indicator Always On
Vehicle: 2003 Ford Escape 2.0 L4 GAS
Brakes Pull Or Drift
- Tire air pressure.
- Wheel alignment.
- Brake pads, shoes or linings.
- Brake or suspension components.
Red Brake Warning Indicator Always On
- Instrument cluster.
- Warning indicator circuit.
- Parking brake.
- Brake fluid level.
Brake Pedal Goes Down Fast
- Brake fluid level.
- Air in system.
- Brake master cylinder fault.
- Normal RABS or ABS function.
Brake Pedal Eases Down Slowly
- Air in system.
- Brake master cylinder fault.
- Normal RABS or ABS function.
Brakes Lock Up During Light Brake Pedal Force
- Disc or drum brake component.
- Parking brake component...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Drum Brakes -> Escape & Mariner -> Adjustments -> Parking Brake -> Service Brake
Vehicle: 2003 Ford Escape 3.0 V6 GAS
Service Brake
- Raise and support vehicle. Ensure parking brake is released.
- Remove rubber access plug from backing plate.
- Slowly rotate rear wheel while gradually increasing length of adjuster assembly by rotating adjusting screw using brake adjustment tool No. D91L-1103-C, or equivalent.
- In...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Drum Brakes -> Escape, Villager & Windstar -> Precautions
Vehicle: 2003 Ford Escape 2.0 L4 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, precautions should be taken to minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear a suitable respirator approved for asbestos dust u...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Aviator -> E-Series -> Escape -> Excursion & F-Super Duty -> Expedition, Explorer, Explorer Sport & Sport/Trac, F-150, F-250LD, Mountaineer & Navigator -> Less Hydro Max -> Master Cylinder -> Ranger -> Villager -> Windstar -> With Hydro-Max
Vehicle: 2003 Ford Escape 2.0 L4 GAS
Master Cylinder
Aviator
Remove components in sequence illustrated,. Fig. .
E-Series
- Drain brake master cylinder with suitable suction device.
- Remove coolant reservoir.
- On models equipped with Hydro Boost, remove three power distribution box bracket bolts and position box aside.
- On all models, remove speed control deactivator switch.
- Disconnect fluid level sensor connector.
- Remove and discard master cylinder mounting nuts.
- Disconnect master cylinder brake tubes.
- Remove master cylinder cylinder.
- Reverse procedure to install, noting the following:
- Torque master cylinder mounting nuts to 1...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Ford Escape vehicle.
|
| Access the Complete guide! |
