Auto Parts Search
We have info for following modifications of 2003 Ford Expedition
- 2003 Ford Expedition 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2003 Ford Expedition 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:L
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Ford Expedition cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2003 Ford Expedition 4.6 V8 GAS
Front
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations. Failure to follow these instructions may result in personal injury.
- With vehicle in neutral, position vehicle on a hoist.
- Remove front driveshaft shield.
- Index-mark front flange and pinion ...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Ford Expedition cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2003 Ford Expedition 5.4 V8 GAS
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Ford Expedition cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2003 Ford Expedition 5.4 V8 GAS
Front
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations. Failure to follow these instructions may result in personal injury.
- With vehicle in neutral, position vehicle on a hoist.
- Remove front driveshaft shield.
- Index-mark front flange and pinion ...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Ford Expedition cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2003 Ford Expedition 4.6 V8 GAS
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Ford Expedition cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2003 Ford Expedition 5.4 V8 GAS
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations. Failure to follow these instructions may result in personal injury.
- With vehicle in neutral, position vehicle on a hoist.
- Remove the front wheel and tire assembly.
- Remove front halfshaft hub ...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Ford Expedition cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2003 Ford Expedition 4.6 V8 GAS
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations. Failure to follow these instructions may result in personal injury.
- With vehicle in neutral, position vehicle on a hoist.
- Remove the front wheel and tire assembly.
- Remove front halfshaft hub ...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2003 Ford Expedition vehicle. |
Access the Complete guide! |