Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Ford Expedition car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Ford Expedition automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Ford Expedition
- 2003 Ford Expedition 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2003 Ford Expedition 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:L
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2003 Ford Expedition cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Pressure Monitor Sensor (Strap & Cradle Type) -> Pressure Monitor Sensor (Valve Stem Type) -> Removal
Vehicle: 2003 Ford Expedition 5.4 V8 GAS
Pressure Monitor Sensor (Valve Stem Type)
Use only tool no. 204-354 anytime tire pressures are measured to be sure that accurate values are obtained. Place air chuck straight on the valve stem to inflate tire. Do not cock air chuck during inflation cycle. Doing so can damage valve stem and cause air leaks. Ford recommends using a round head air chuck on tire pressure sensors; it is not recommended to use air chucks with long shanks. Doing so can cause tire pressure sensor valve stem damage and loss of tire pressure.
- Remove wheel and tire assembly.
- With valve stem at the 6 o'...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2003 Ford Expedition cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2003 Ford Expedition 5.4 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2003 Ford Expedition cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> 2003-06 -> 2007 -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Identification -> Intermittent & Poor Connections -> Intermittents -> Poor Connections -> Symptom Test
Vehicle: 2003 Ford Expedition 4.6 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Trouble Code Identification
2003-06
Refer to Fig. for diagnostic trouble code identification.
2007
Refer to Fig. for diagnostic trouble code identification.
Clearing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector), and follow manufacturer's instructions.
Symptom Test
2003-06
Refer to Fig. for symptom test chart.
2007
Refer to Fig. for symptom test chart.
Intermittent & Poor Connections
In...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2003 Ford Expedition cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2003 Ford Expedition 4.6 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2003 Ford Expedition cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> 2003-06 -> 2007 -> Wire Color Code Identification
Vehicle: 2003 Ford Expedition 5.4 V8 GAS
2003-06
Refer to Fig. for wiring diagram.
2007
Re...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2003 Ford Expedition AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2003 Ford Expedition cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2003 Ford Expedition 4.6 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Expedition TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
