Auto Parts Search
We have info for following modifications of 2003 Hyundai Santa FE
- 2003 Hyundai Santa FE 2.4 L4 GAS, CC:2351, Fuel Injection
- 2003 Hyundai Santa FE 2.7 V6 GAS, CC:2656, Fuel Injection
- 2003 Hyundai Santa FE 3.5 V6 GAS, CC:3500, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2003 Hyundai Santa FE AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Hyundai Santa FE cars and light trucks from 1990+.
Hyundai -> Hydraulic Brake Systems -> Brake System Bleed -> Less Anti-Lock Brakes -> With Anti-Lock Brakes
Vehicle: 2003 Hyundai Santa FE 2.7 V6 GAS
Less Anti-Lock Brakes
- Fill master cylinder reservoir with brake fluid.
- Insert end of hose into a container full of brake fluid using a suitable length and diameter of vinyl hose.
- Secure other end of hose to wheel cylinder bleeder plug farthest from master cylinder.
- An assistant should depress brake pedal slowly several times, then hold-down, do not depress completely.
- Loosen bleeder valve, then watch for air bubbles in fluid.
- Tighten bleeder screw before pressure is lost inline. Tighten bleeder screw.
- Repeat procedure until all air bubbles are absent, brake pedal is firm and no leak...
CLICK HERE TO GET FULL ACCESS TO 2003 Hyundai Santa FE BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Hyundai Santa FE AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Hyundai Santa FE cars and light trucks from 1990+.
Hyundai -> Power Brake Units -> Troubleshooting -> Check Valve Operation
Vehicle: 2003 Hyundai Santa FE 2.7 V6 GAS
Check Valve Operation
- Remove booster hose from check valve.
- Start engi...
CLICK HERE TO GET FULL ACCESS TO 2003 Hyundai Santa FE BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Hyundai Santa FE AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Hyundai Santa FE cars and light trucks from 1990+.
Hyundai -> Disc Brakes -> Brake Pad Service -> Accent -> Elantra & Tiburon -> Elantra, Sonata & Tiburon -> Front -> Rear -> Santa Fe & Tucson -> Sonata -> XG 350
Vehicle: 2003 Hyundai Santa FE 2.4 L4 GAS
Front
Accent
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove lower bolt and caliper assembly, Fig. . Position assembly aside using suitable wire.
- Remove brake pads and shim.
- Bottom piston in caliper using a suitable tool.
- Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
Elantra, Sonata & Tiburon
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove two mounting bolts attaching caliper to torque plate, Fig. .
- Remove brake caliper assembly, then position aside using suitable wire.
- Remove brake pads.
- Install pad cl...
CLICK HERE TO GET FULL ACCESS TO 2003 Hyundai Santa FE BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Hyundai Santa FE AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Hyundai Santa FE cars and light trucks from 1990+.
Hyundai -> Disc Brakes -> Caliper Service -> Accent -> Assemble -> Disassemble -> Elantra & Tiburon -> Elantra, Sonata & Tiburon -> Front -> Installation -> Rear -> Removal -> Santa Fe & Tucson -> Sonata -> XG 350
Vehicle: 2003 Hyundai Santa FE 2.4 L4 GAS
Front
Accent
Removal
- Remove wheel/tire assembly.
- Remove brake hose from caliper and cap brake line(s).
- Remove caliper assembly as outlined under .
Disassemble
- Remove sleeve, sleeve boot and pin boots, Fig. .
- Protect fingers with shop towel, then blow piston from caliper bore with compressed air.
- Remove piston boot, then pry piston seal from caliper bore using a suitable screwdriver.
Assemble
- Clean all components with suitable cleaner.
- Inspect caliper bore, piston and carrier for damage or excessive wear.
- Apply suitable rubber grease to new piston seal, then install piston seal in caliper bor...
CLICK HERE TO GET FULL ACCESS TO 2003 Hyundai Santa FE BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Hyundai Santa FE AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Hyundai Santa FE cars and light trucks from 1990+.
Hyundai -> Power Brake Units -> Power Brake Unit, Replace
Vehicle: 2003 Hyundai Santa FE 2.4 L4 GAS
- Remove master cylinder as outlined under .
- Disconnect vacuum hose.
- From inside vehicle, separate brake pedal to booster rod ...
CLICK HERE TO GET FULL ACCESS TO 2003 Hyundai Santa FE BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Hyundai Santa FE AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Hyundai Santa FE cars and light trucks from 1990+.
Hyundai -> Power Brake Units -> Troubleshooting -> Check Valve Operation
Vehicle: 2003 Hyundai Santa FE 2.4 L4 GAS
Check Valve Operation
- Remove booster hose from check valve.
- Start engi...
CLICK HERE TO GET FULL ACCESS TO 2003 Hyundai Santa FE BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2003 Hyundai Santa FE vehicle. |
Access the Complete guide! |