Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Pontiac Aztek car and truck
repair procedures including Pontiac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Pontiac Aztek automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Pontiac Aztek AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Pontiac Aztek cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2003-05 Aztek -> Reset
Vehicle: 2003 Pontiac Aztek 3.4 V6 GAS
Reset
The TPMS (Tire Pressure Monitor System) alerts the driver when a large change in the pressure of one tire exists. The system detects a tire pressure condition while the vehicle is in motion, once a tire pressure condition is detected, the system alerts the driver whenever the ignition is turned On.
- Inflate all tires to vehicle manufacturer's specifications.
- Place ignition switch in the On position.
- Press MODE button until DIC (Driver Information Center) d...
CLICK HERE TO GET FULL ACCESS TO 2003 Pontiac Aztek MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Pontiac Aztek AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Pontiac Aztek cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> Reduce Engine Power Indicator Lamp ->
Vehicle: 2003 Pontiac Aztek 3.4 V6 GAS
The Reduce Engine Power indicator lamp should light for a approximately 3 seconds when the ignition is turned On as a bulb check. If the warning lamp turns On during vehicle operation, a vehicl...
CLICK HERE TO GET FULL ACCESS TO 2003 Pontiac Aztek MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Pontiac Aztek AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Pontiac Aztek cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> Check Engine/Service Engine Soon Indicator Lamp -> Electronic Engine Controls Or Electronic Fuel Injection Except Tracker
Vehicle: 2003 Pontiac Aztek 3.4 V6 GAS
The Check Engine/Service Engine Soon Lamp should light when the ignition is turned On. When the engine is started, the lamp should go off. If the lamp remains on for 10 seconds or constantly after the engine is started, the self diagnosis system has detected a problem and has stored a code in the system Electronic Control Module (ECM) or Powertrain Control Module (PCM). After diagnosis and repair, the ECM/PCM memory can be cleared of codes either by using a scan tool (OBD II systems) or by disconnecting the battery ground ca...
CLICK HERE TO GET FULL ACCESS TO 2003 Pontiac Aztek MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Pontiac Aztek AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Pontiac Aztek cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> Traction Control System (TCS)/Electronic Stability Control (ESC) Warning Lamp ->
Vehicle: 2003 Pontiac Aztek 3.4 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If t...
CLICK HERE TO GET FULL ACCESS TO 2003 Pontiac Aztek MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Pontiac Aztek AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Pontiac Aztek cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> Service Four Wheel Drive (4WD) System Warning Lamp ->
Vehicle: 2003 Pontiac Aztek 3.4 V6 GAS
This lamp should light for approximately 6-8 seconds when the ignition is turned On as a bulb check. If the ...
CLICK HERE TO GET FULL ACCESS TO 2003 Pontiac Aztek MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Pontiac Aztek AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Pontiac Aztek cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Trucks -> Change Oil, Change Oil Now Or Change Oil Soon Lamp & Messages -> Aztek -> Less Driver Information Center (DIC) -> With Driver Information Center (DIC)
Vehicle: 2003 Pontiac Aztek 3.4 V6 GAS
Less Driver Information Center (DIC)
To reset the Engine Oil Life monitor proceed as follows:
- Turn ignition On, but do not start engine.
- Fully depress and release accelerator pedal three times within five seconds. The oil life indicator will begin to flash indicating the system is resetting.
- Turn ignition Off, then start engine.
- The engine oil change lamp should light as a bulb check...
CLICK HERE TO GET FULL ACCESS TO 2003 Pontiac Aztek MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Pontiac Aztek vehicle.
|
| Access the Complete guide! |
