Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Porsche Cayenne car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Porsche Cayenne automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Porsche Cayenne
- 2003 Porsche Cayenne S 4.5 V8 GAS, CC:4511, Fuel Injection, Engine VIN:, Desg:B
- 2003 Porsche Cayenne Turbo 4.5 V8 GAS, CC:4511, Fuel Injection, Engine VIN:, Desg:C
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Porsche Cayenne AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Porsche Cayenne cars and light trucks from 1990+.
DRIVESHAFT, Replace -> FRONT -> REAR
Vehicle: 2003 Porsche Cayenne Turbo 4.5 V8 GAS
FRONT
- Raise and support vehicle.
- Remove engine guard.
- Remove three shield screws on the all-wheel final drive. To undo cardan shaft screw connections, a second person should sit in the vehicle and block drive harness by pressing footbrake.
- The colored markings, match points, on cardan shaft and on the flange of rear final drive must be installed along a straight line. This neutralizes residual imbalance in components.
- Remove cardan shaft from front-axle final drive.
- Remove cardan shaft from transfer case. Caution: Screw threads used to fasten the transmission cross member can pull...
CLICK HERE TO GET FULL ACCESS TO 2003 Porsche Cayenne DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Porsche Cayenne AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Porsche Cayenne cars and light trucks from 1990+.
DRIVESHAFT, Replace -> FRONT -> REAR
Vehicle: 2003 Porsche Cayenne S 4.5 V8 GAS
FRONT
- Raise and support vehicle.
- Remove engine guard.
- Remove three shield screws on the all-wheel final drive. To undo cardan shaft screw connections, a second person should sit in the vehicle and block drive harness by pressing footbrake.
- The colored markings, match points, on cardan shaft and on the flange of rear final drive must be installed along a straight line. This neutralizes residual imbalance in components.
- Remove cardan shaft from front-axle final drive.
- Remove cardan shaft from transfer case. Caution: Screw threads used to fasten the transmission cross member can pull...
CLICK HERE TO GET FULL ACCESS TO 2003 Porsche Cayenne DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



