Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Chevrolet Impala car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Chevrolet Impala automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Chevrolet Impala
- 2004 Chevrolet Impala 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2004 Chevrolet Impala 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:E
- 2004 Chevrolet Impala LS 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2004 Chevrolet Impala SS 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:1
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Chevrolet Impala 3.4 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Chevrolet Impala 3.8 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Chevrolet Impala LS 3.8 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Chevrolet Impala SS 3.8 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
