Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Chevrolet Malibu car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Chevrolet Malibu automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Chevrolet Malibu
- 2004 Chevrolet Malibu 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2004 Chevrolet Malibu LS 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2004 Chevrolet Malibu LT 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2004 Chevrolet Malibu Maxx 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2004 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2004 Chevrolet Malibu cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2004 Chevrolet Malibu Maxx 3.5 V6 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from engine using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from engine and from vehicle.
- Reverse procedure to install.
...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2004 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2004 Chevrolet Malibu cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2004 Chevrolet Malibu LS 3.5 V6 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from engine using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from engine and from vehicle.
- Reverse procedure to install.
...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2004 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2004 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2004 Chevrolet Malibu Maxx 3.5 V6 GAS
- Drain engine coolant.
- Remove lefthand headlamp assembly attaching bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect headlamp assembly electrical connector and remove assembly from vehicle.
- Remove righthand headlamp assembly attaching bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect headlamp assembly electrical connector and remove assembly from vehicle.
- Loop a suitable rope around upper two tabs of condenser, then tie rope around upper engine compartment tie bar.
- Remove upper radiator support bracket bolts and support br...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2004 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2004 Chevrolet Malibu cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2004 Chevrolet Malibu Maxx 3.5 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at heater pipe assembly using hose clamp pliers J 38185 or equivalent.
- Remove hose from heater pipe assembly.
- Disconnect heater inlet hose from underhood junction box retainer clip.
- Reposition heater hose inlet clamp at water pump using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from water pump...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2004 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2004 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2004 Chevrolet Malibu LT 3.5 V6 GAS
- Remove intake manifold cover.
- Remove lefthand inner fender brace.
- Remove air cleaner outlet duct from throttle body.
- Disconnect PCV tube from air inlet duct.
- Disconnect Mass Air Flow (MAF) sensor electrical connector.
- Remove upper air cleaner housing.
- Remove Powertrain Control Module (PCM) and harness from lower air cleaner housing. Do not disconnect connectors.
- Remove Transmission Control Module (TCM) and harness from lower air cleaner housing. Do not disconnect connectors.
- Loosen clamp and remove air cleaner outlet duct from air cleaner.
- Disconnect two rubber grommets on inner rail a...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2004 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2004 Chevrolet Malibu cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2004 Chevrolet Malibu LT 3.5 V6 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from engine using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from engine and from vehicle.
- Reverse procedure to install.
...
CLICK HERE TO GET FULL ACCESS TO 2004 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
