Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Chrysler Pacifica car and truck
repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Chrysler Pacifica automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2004 Pacifica -> Relearn -> Reset -> Vehicles Built After 7/28/03 -> Vehicles Built Before 7/10/03
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
Reset
The Low Tire Pressure indicator lamp will flash slowly and sound a single tone when tire pressure is low. If tire pressure drops lower, the indicator lamp will flash rapidly and the tone will be continuous. When the tire is inflated to the proper pressure the lamp and tone will turn Off. The vehicle may need to be driven at a speed above 15 mph for up to 10 minutes for the TPMS to receive this information. If the lamp remains On, a problem in the low tire warning system is present and the low tire warning system must be diagnosed and serviced to reset the warning lamp.
Relearn
...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Electronic Vehicle Information Center (EVIC) -> Pacifica
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
Electronic Vehicle Information Center (EVIC) is located in a overhead console and is programmable by driver to suit his/her driving needs:
- Place ignition switch in On position.
- Depress and release menu push button to display first programmable feature.
- Momentarily depress and release step push button to step through following programmable features:
- Language?
- Display U.S. or Metric?
- Use Factory Settings?
- Auto Door Locks.
- Auto Unlock On Exit?
- Remote Unlock Driver's Door First.
- Remote Unlock All Doors.
- Remote Lin...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Service 4WD System Warning Lamp ->
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
This lamp should light for a approximately 2 seconds when the ignition is turned On as a bulb check. If the warning lamp...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> All Wheel Drive (AWD) Warning Lamp ->
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
This light monitors the AWD system. The light will turn on for a bulb check when the ignition switch is turned to the on position and may stay on for as long as three seconds. When the lamp is illuminated solid here is an A...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Electronic Throttle Control Indicator ->
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
When the ignition is turned On, the lamp will light for approximately 6-12 seconds as a bulb inspection. If the lamp is illuminated with the engine running, the vehicle is usually drivable but the electronic throttle system must be diagnosed and servic...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Check Gauge Warning Lamp ->
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
When the ignition is turned On, the lamp will light for approximately 2 seconds as a bulb inspection. The PCM continually monitors the engine oil pressure, engine coolant temperature and electrical system voltage. The check gauges lamp w...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2004 Chrysler Pacifica vehicle.
|
| Access the Complete guide! |
