Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Ford Explorer car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Ford Explorer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Ford Explorer
- 2004 Ford Explorer 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2004 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2004 Ford Explorer 4.0 V6 FLEX, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:K
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Charge System Warning Indicator ->
Vehicle: 2004 Ford Explorer 4.6 V8 GAS
The charge system warning indicator lamps are used to warn of no alternator output. When ignition switch contacts are closed, current flows through charge indicator and pa...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Check Gauge Warning Lamp ->
Vehicle: 2004 Ford Explorer 4.0 V6 FLEX
This indicator should light if any of the following conditions appear:
- Engine oil pressure drops below approxi...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Anti-Lock Or Rear Anti-Lock Brake System Warning ->
Vehicle: 2004 Ford Explorer 4.0 V6 FLEX
Red and yellow indicator lamps are used to warn of system faults. The red lamp warns of such faults as low brake fluid level, parking brake On, system pressure differential and other system faults. The red indicator lamp will light for approximately two seconds during engine starting and should go off, unless parking brake is applied or a problem in the brake system exist. The red indicator lamp should reset after repairs to system have ...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Emission Maintenance Reminder Indicator ->
Vehicle: 2004 Ford Explorer 4.0 V6 GAS
This lamp should light after approximately 60,000 miles of operation, Fig. . The amber lens lamp is located on the instrument panel and has the word Emissions, Emiss or EGR printed on it. After performing the required emission control maintenance, the module must be replaced or reset, depending on type of module used. On module equipped with reset feature, reset the module as follows:
- Turn ignition Off.
- On Aerostar models, the module is located under the instrument panel near the bulkhead connector.
- On Bronco, Explorer and F-Series, the module is attached to the instrument cluster to the left of ...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Low Fuel Level Warning Lamp ->
Vehicle: 2004 Ford Explorer 4.0 V6 GAS
When fuel level drops below a predetermined level, the CHECK GAUGE indicator should light. The CHECK GAUGE indicator shoul...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2003-05 Explorer -> Relearn -> Reset -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2004 Ford Explorer 4.6 V8 GAS
Reset
If tire pressure is severely low or high the Message Center will display a Warning Tire Very Low, Check Tire Pressure or Check Spare Tire Pressure warning. After correcting tire pressure, proceed as follows:
- Place the ignition switch in the On position.
- With the Warning Check Tire Pressure warning displayed, depress the Message Center RESET button to clear the warning message.
- The Warning Check Tire Pressure or Check Spare Tire Pressure message will reappear every 10 minutes after message has been cleared until the tire pressure condition has been corrected.
Relearn
TPMS Sensor...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
