Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Porsche Boxster car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Porsche Boxster automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Porsche Boxster
- 2004 Porsche Boxster 2.7 H6 GAS, CC:2687, Fuel Injection
- 2004 Porsche Boxster S 3.2 H6 GAS, CC:3179, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Porsche Boxster AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Porsche Boxster cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Left -> Right
Vehicle: 2004 Porsche Boxster S 3.2 H6 GAS
Right
- Raise and support vehicle then remove wheel.
- Loosen and unscrew axle nut.
- Push suitable protection over drive shaft.
- Undo drive shaft on transmission.
- Undo stabilizer mount on stabilizer.
- Undo ball heads of toe control arm and axle strut and counter with special tool 9546 (Torx) or equivalent.
- Press out both ball heads using special tool 9560 (press-off tool) or equivalent and a commercially available press-off tool. When positioning puller, ensure that boot of ball head is not damaged. If necessary, coat boot and press-off tool with tire mounting paste. If necessary, use ...
CLICK HERE TO GET FULL ACCESS TO 2004 Porsche Boxster DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Porsche Boxster AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Porsche Boxster cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Left -> Right
Vehicle: 2004 Porsche Boxster 2.7 H6 GAS
Right
- Raise and support vehicle then remove wheel.
- Loosen and unscrew axle nut.
- Push suitable protection over drive shaft.
- Undo drive shaft on transmission.
- Undo stabilizer mount on stabilizer.
- Undo ball heads of toe control arm and axle strut on right side and counter with special tool 9546 (Torx) or equivalent.
- Press out both ball heads using special tool 9560 (press-off tool) or equivalent and a commercially available press-off tool. When positioning puller, ensure that boot of ball head is not damaged. If necessary, coat boot and press-off tool with tire mounting paste. If n...
CLICK HERE TO GET FULL ACCESS TO 2004 Porsche Boxster DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



