Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Toyota Tundra car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Toyota Tundra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Toyota Tundra
- 2004 Toyota Tundra 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2004 Toyota Tundra 3.4 V6 GAS, CC:3378, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Toyota Tundra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Toyota Tundra cars and light trucks sold in the U.S. from 1990+.
Toyota -> Air Bag Warning Lamp -> 2000-04 Tundra
Vehicle: 2004 Toyota Tundra 3.4 V6 GAS
- Connect service wires to check connector terminals Tc and AB.
- Place ignition switch in Accessory or On positions and wait approximately 6 seconds.
- Apply body ground to terminals Tc and AB alternately, twice in 1 second intervals beg...
CLICK HERE TO GET FULL ACCESS TO 2004 Toyota Tundra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Toyota Tundra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Toyota Tundra cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Coolant Lamp ->
Vehicle: 2004 Toyota Tundra 3.4 V6 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 2004 Toyota Tundra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Toyota Tundra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Toyota Tundra cars and light trucks sold in the U.S. from 1990+.
Toyota -> Automatic Transmission Overdrive Lamp ->
Vehicle: 2004 Toyota Tundra 4.7 V8 GAS
The "OD Off" lamp will be illuminated when the ignition switch is in the On position and the Overdrive (OD) switch is in the Off position. When the OD switch is placed in the On position, the "OD Off" lamp should go out. If the lamp flashes when the switch is placed in the On position, a fault has been detected by the electronic control system. After diagnosis and repair are c...
CLICK HERE TO GET FULL ACCESS TO 2004 Toyota Tundra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Toyota Tundra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Toyota Tundra cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Oil Level Warning Indicator ->
Vehicle: 2004 Toyota Tundra 3.4 V6 GAS
This lamp lights to indicate that the engine oil level is below a specified level. The lamp will be illuminated during engine start-up. If...
CLICK HERE TO GET FULL ACCESS TO 2004 Toyota Tundra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Toyota Tundra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Toyota Tundra cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 2000-09 Tundra
Vehicle: 2004 Toyota Tundra 4.7 V8 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch ...
CLICK HERE TO GET FULL ACCESS TO 2004 Toyota Tundra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2004 Toyota Tundra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2004 Toyota Tundra cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Oil Level Warning Indicator ->
Vehicle: 2004 Toyota Tundra 4.7 V8 GAS
This lamp lights to indicate that the engine oil level is below a specified level. The lamp will be illuminated during engine start-up. If...
CLICK HERE TO GET FULL ACCESS TO 2004 Toyota Tundra MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2004 Toyota Tundra vehicle.
|
| Access the Complete guide! |
