Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
Vehicle: 2005 Chevrolet Corvette 6.0 V8 GAS
The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Reduce Engine Power Indicator Lamp ->
Vehicle: 2005 Chevrolet Corvette 6.0 V8 GAS
The Reduce Engine Power indicator lamp should light for a approximately 3 seconds when the ignition is turned on as a bulb check. If the warning lamp turns on during vehicle operation, a vehicl...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Low Washer Fluid Indicator ->
Vehicle: 2005 Chevrolet Corvette 6.0 V8 GAS
The windshield washer solvent tank has a switch that closes when the wash...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Engine Or Service Now Soon Engine Indicator Lamps (Gasoline Engines w/Electronic Engine Controls Or EFI) -> Except LeMans, Metro, Prizm, Storm & Vibe
Vehicle: 2005 Chevrolet Corvette 6.0 V8 GAS
The Check Engine lamp should light when the ignition is turned On. When the engine is started, the lamp should go off. If the lamp remains on for 10 seconds or constantly after the engine is started, the self diagnosis system has detected a fault condition and has stored a code in the system Electronic Control Module (ECM) or Powertrain Control Module (PCM). After diagnosis and repair, the ECM memory can be cleared of codes as follows:
On models except Cadillac with DEFI, remove the ECM/PCM fuse or disconnect the battery ground cable for approximately 30...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2005-07 Corvette -> Relearn -> Reset
Vehicle: 2005 Chevrolet Corvette 6.0 V8 GAS
Reset
If the system detects a tire pressure above 42 psi., the HIGH TIRE PRESSURE message will be displayed on the DIC. If the system detects a tire pressure between 5 and 25 psi., LOW TIRE PRESSURE will be displayed. If a tire pressure below 5 psi. is detected, FLAT TIRE will be displayed followed by two chime sounds and the message MAX. SPEED 55 mph and REDUCED HANDLING. After servicing or inflating tire to recommended pressure, press DIC RESET button to clear DIC warning messages.
Relearn
If using the pressure increase decrease method, the procedure must be completed within 15 ...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Change Oil, Change Oil Now Or Change Oil Soon Lamp & Messages -> 2005-06 Corvette
Vehicle: 2005 Chevrolet Corvette 6.0 V8 GAS
The Engine Oil Life System calculates when to change the engine oil and filter based upon vehicle use. Anytime the oil is changed, the system must be reset so it can calculate when the next oil change is due. If for any reason the oil gets changed before the "CHANGE ENGINE OIL" message appears, reset the system...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
