Auto Parts Search
We have info for following modifications of 2005 Dodge Neon
- 2005 Dodge Neon SE 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
- 2005 Dodge Neon SRT-4 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:S
- 2005 Dodge Neon SXT 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Dodge Neon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Dodge Neon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Non-turbo -> Turbo
Vehicle: 2005 Dodge Neon SRT-4 2.4 L4 GAS
- Raise and support vehicle on hoist.
- Mark transmission and axle flanges and rubber couplers for installation alignment.
- Remove crossmember, rear exhaust system and heat shield.
- Remove propeller shaft front and rear coupler-to-flange bolts.
- Remove center bearing mounting bolts.
- Remove propeller shaft with aid of helper. Never allow propeller shaft to hang from center bearing, or while only connected to transmission or rear axle flanges.
- Remove three couple...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Neon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Dodge Neon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Dodge Neon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Non-turbo -> Turbo
Vehicle: 2005 Dodge Neon SXT 2.0 L4 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle, then remove tire and wheel assembly.
- While holding link ball joint stem from rotating, remove stabilizer link to shock clevis bracket nut.
- Slide link ball joint stem from clevis bracket.
- Remove clevis bracket to bottom of shock nut and pinch bolt.
- Remove shock clevis bracket to lower control arm nut and bolt.
- Pul...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Neon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Dodge Neon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Dodge Neon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Non-turbo -> Turbo
Vehicle: 2005 Dodge Neon SE 2.0 L4 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle, then remove tire and wheel assembly.
- While holding link ball joint stem from rotating, remove stabilizer link to shock clevis bracket nut.
- Slide link ball joint stem from clevis bracket.
- Remove clevis bracket to bottom of shock nut and pinch bolt.
- Remove shock clevis bracket to lower control arm nut and bolt.
- Pul...
CLICK HERE TO GET FULL ACCESS TO 2005 Dodge Neon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Dodge Neon vehicle. |
Access the Complete guide! |