Auto Parts Search
We have info for following modifications of 2005 Ford Escape
- 2005 Ford Escape 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:1
- 2005 Ford Escape 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2005 Ford Escape Hybrid 2.3 L4 ELECTRIC/GAS, CID:140, Fuel Injection, Aspiration:140
BRAKE SERVICE PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
Anti-Lock Brakes -> Escape & Mariner -> Precautions -> Brake Fluid Handling -> High-Voltage Traction Battery Systems Depowering
Vehicle: 2005 Ford Escape 2.3 L4 GAS
Brake Fluid Handling
Brake fluid can cause serious injury and vehicle damage if not handled properly. Avoid contact with eyes and do not allow fluid to splash or spill on painted surfaces. Wash hands thoroughly after handling.
High-Voltage Traction Battery Systems Depowering
The nominal high voltage traction battery (HVTB) voltage is 330 volts DC. The buffer zone must be set up. The high voltage traction battery and charging system contains high voltage components and wiring. High voltage cables and wiring are orange in color. High voltage insulated safety gloves and a face shield must...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
Drum Brakes -> Escape & Mariner -> Inspection -> Adjuster Mechanism -> Backing Plate -> Brake Drums -> Brake Linings & Springs -> Parking Brake Cable
Vehicle: 2005 Ford Escape 3.0 V6 GAS
Brake Drums
Any time brake drums are removed for brake service, braking surface diameter should be inspected with a suitable micrometer at several points to determine if they are within the safe oversize limit stamped on the brake drum outer surface. If braking surface diameter exceeds specifications, the drum must be replaced. If braking surface diameter is within specifications, drums should be cleaned and inspected for cracks, scores, deep grooves, taper, out of round and heat spotting. If drums are cracked or heat spotted, they must be replaced.
Minor scores should be removed with ...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
Anti-Lock Brakes -> Escape & Mariner -> Description -> Regenerative Braking System -> System Operation
Vehicle: 2005 Ford Escape Hybrid 2.3 L4 ELECTRIC/GAS
System Operation
The anti-lock brake system (ABS) module, with or without stability assist, simultaneously manages the anti-lock braking, traction control and engine control systems to maintain vehicle control during deceleration and acceleration. The ABS accomplishes this by communicating with the other modules over the high speed controller area network (HS-CAN) bus.
When the ignition switch is in the RUN position, the module carries out a preliminary electrical check and, at approximately 20 km/h (12 mph), the hydraulic pump motor is turned on for approximately one half-second. An...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
Disc Brakes -> Description -> Aviator -> E-Series -> Escape & Mariner -> Excursion, F-Super Duty & Motorhome -> Expedition & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac -> F-150 & Mark LT -> Freestar & Monterey -> Front -> Ranger -> Rear
Vehicle: 2005 Ford Escape 3.0 V6 GAS
Aviator
Front
The Aviator utilizes a dual piston front brake caliper and a single piston rear brake caliper. The caliper floats on two guide pins that are bolted to the caliper and extend into the caliper anchor, Fig. .
Rear
The rear disc brake system utilizes a single piston brake caliper. The mechanical parking brake system uses a drum in hat system within the rear brake disc, Fig. .
E-Series
Front
The disc brake caliper is a pin slider, single piston design on the E-150 models and a pin slider dual piston design on the E-250, E-350, E-450 & E-550 models, Figs. through .
Rear
E-Series veh...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
Drum Brakes -> Escape & Mariner -> Brake Service -> Escape & Mariner
Vehicle: 2005 Ford Escape 2.3 L4 GAS
Escape & Mariner
- Raise and support vehicle.
- Remove rear tire and wheel assemblies.
- Remove brake drum retaining clips, if equipped.
- If brake drums will not come off, move brake shoe adjusting lever of brake adjuster screw, then loosen brake shoe adjuster nut.
- Remove brake dust and dirt from assemblies with brake/clutch service vacuum.
- If new sh...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
Power Brake Units -> Bendix Vacuum Brake Booster -> Description
Vehicle: 2005 Ford Escape 3.0 V6 GAS
The single and tandem vacuum boosters, Figs. and , are self contained vacuum hydraulic power braking units. These are vacuum suspended units that use vacuum and atmospheric pressure for their power.
On models equipped with gasoline engines, vacuum is supplied through a fitting in the intake manifold. On models equipped with diesel engines, vacuum is supplied through a vacuum pump.
The three basic elements of the booster are the vacuum power chamber, mechanically actua...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Ford Escape vehicle. |
Access the Complete guide! |