Auto Parts Search
We have info for following modifications of 2005 Ford Escape
- 2005 Ford Escape 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:1
- 2005 Ford Escape 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2005 Ford Escape Hybrid 2.3 L4 ELECTRIC/GAS, CID:140, Fuel Injection, Aspiration:140
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Ford Escape 3.0 V6 GAS
- Raise and safely support the vehicle.
- Remove front wheel assembly.
- Remove front brake disc.
- Remove and discard front axle wheel hub nut.
- Remove tie rod end nut, then remove tie rod end.
- Separate the lower ball joint from the front wheel knuckle.
- Separate halfs...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Ford Escape 2.3 L4 GAS
- Raise and safely support the vehicle.
- Remove front wheel assembly.
- Remove front brake disc.
- Remove and discard front axle wheel hub nut.
- Remove tie rod end nut, then remove tie rod end.
- Separate the lower ball joint from the front wheel knuckle.
- Separate halfs...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Ford Escape 3.0 V6 GAS
Do not reuse the bolts and cap straps for either the center U-joint or the rear U-joint. Install new bolts and cap straps or damage to the vehicle may occur. There is a difference in length of the head of the replacement yoke strap bolts from the production bolts. The longer head pinion bolts can be used in either location.
- Remove driveshaft.
- Clamp bearing cup re...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2005 Ford Escape 3.0 V6 GAS
Do not swap driveshaft assembles from different vehicles. The Escape Hybrid drive shaft is longer than the driveshaft in the Escape/Mariner and is not interchangeable.
- With vehicle in NEUTRAL, position it on a hoist.
- Remove ground strap bolt.
- Remove and discard 6 front driveshaft-to-transfer case bolts and washers. Do not reuse CV joint bolts and washers. Install new bolts and washers or damage to vehicle may occur.
- Index-mark front driveshaft to center bearing.
- Remove and discard 4 universal joint cap strap bolts and 2 cap straps and remove front driveshaft. Do not reuse bolts a...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Ford Escape Hybrid 2.3 L4 ELECTRIC/GAS
Do not reuse the bolts and cap straps for either the center U-joint or the rear U-joint. Install new bolts and cap straps or damage to the vehicle may occur. There is a difference in length of the head of the replacement yoke strap bolts from the production bolts. The longer head pinion bolts can be used in either location.
- Remove driveshaft.
- Clamp bearing cup re...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Ford Escape AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Ford Escape cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Ford Escape Hybrid 2.3 L4 ELECTRIC/GAS
- Raise and safely support the vehicle.
- Remove front wheel assembly.
- Remove front brake disc.
- Remove and discard front axle wheel hub nut.
- Remove tie rod end nut, then remove tie rod end.
- Separate the lower ball joint from the front wheel knuckle.
- Separate halfs...
CLICK HERE TO GET FULL ACCESS TO 2005 Ford Escape DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Ford Escape vehicle. |
Access the Complete guide! |