Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Chevrolet Corvette
- 2006 Chevrolet Corvette 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 Chevrolet Corvette Z06 7.0 V8 GAS, CC:7011, CID:427, Fuel Injection, Aspiration:427, Engine VIN:, Desg:E
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2006 Chevrolet Corvette Z06 7.0 V8 GAS
The TPMS warns the driver when a significant loss, or gain of tire pressure occurs in any of the four tires and allows the driver to display the individual tire pressures and the locations on the DIC (Driver Information Center) display. The system uses the BCM (Body Control Module), DIC, remote control door lock receiver, a radio frequency transmitting pressure sensor in each wheel assembly and the serial data circuit.
When the vehicle is stationary for 20 minutes or longer, the sensor is inactive. When the vehicle is operated and as the vehicle speed increases, centrifugal force act...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2006 Chevrolet Corvette 6.0 V8 GAS
If the system detects a tire pressure above 42 psi., the HIGH TIRE PRESSURE message will be displayed on the DIC. If the system detects a tire pressure between 5 and 25 psi., LOW TIRE PRESSURE will be displayed. If a tire pressure be...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2006 Chevrolet Corvette Z06 7.0 V8 GAS
Tire Pressure Indicator Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over the head.
- Rotate the tire and wheel assembly clockwise using the tire changer when transferri...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2006 Chevrolet Corvette 6.0 V8 GAS
The TPMS warns the driver when a significant loss, or gain of tire pressure occurs in any of the four tires and allows the driver to display the individual tire pressures and the locations on the DIC (Driver Information Center) display. The system uses the BCM (Body Control Module), DIC, remote control door lock receiver, a radio frequency transmitting pressure sensor in each wheel assembly and the serial data circuit.
When the vehicle is stationary for 20 minutes or longer, the sensor is inactive. When the vehicle is operated and as the vehicle speed increases, centrifugal force act...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2006 Chevrolet Corvette Z06 7.0 V8 GAS
If using the pressure increase decrease method, the procedure must be completed within 15 minutes from when the vehicle was driven at a speed of 20 mph or greater for 10 seconds.
- Place the ignition switch in the ACC position.
- Press the keyless entry transmitter lock and unlock buttons at the same time until the horn emits a chirp sound. If the horn does not chirp with in 15 seconds, repeat steps 1 and 2.
- Starting with the left front tire, hold the antenna of GM tool No. J-46079, or equiva...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2006 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2006 Chevrolet Corvette Z06 7.0 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
