Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Chevrolet Malibu car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Chevrolet Malibu automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Chevrolet Malibu
- 2006 Chevrolet Malibu LS 2.2 L4 GAS, CC:2189, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2006 Chevrolet Malibu Maxx LT 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2006 Chevrolet Malibu Maxx LS 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2006 Chevrolet Malibu LT 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2006 Chevrolet Malibu LT 2.2 L4 GAS, CC:2189, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2006 Chevrolet Malibu Maxx LTZ 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2006 Chevrolet Malibu LTZ 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:8
- 2006 Chevrolet Malibu SS 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
- 2006 Chevrolet Malibu Maxx SS 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Chevrolet Malibu cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2006 Chevrolet Malibu LS 2.2 L4 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from thermostat housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from thermostat housing.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator and from vehicle.
- Reverse procedure to ...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2006 Chevrolet Malibu LT 3.5 V6 GAS
- Remove intake manifold cover.
- Remove lefthand inner fender brace.
- Remove air cleaner outlet duct from throttle body.
- Disconnect PCV tube from air inlet duct.
- Disconnect Mass Air Flow (MAF) sensor electrical connector.
- Remove upper air cleaner housing.
- Remove Powertrain Control Module (PCM) and harness from lower air cleaner housing. Do not disconnect connectors.
- Remove Transmission Control Module (TCM) and harness from lower air cleaner housing. Do not disconnect connectors.
- Loosen clamp and remove air cleaner outlet duct from air cleaner.
- Disconnect two rubber grommets on inner rail a...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2006 Chevrolet Malibu LT 2.2 L4 GAS
- Drain engine coolant.
- Remove lefthand headlamp assembly mounting bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect connector and remove headlamp.
- Remove righthand headlamp assembly mounting bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect connector and remove headlamp.
- Loop suitable rope around upper two tabs of condenser and tie rope around upper engine compartment tie bar.
- Remove upper radiator support bracket bolts and support brackets.
- Remove surge tank outlet hose from radiator.
- Remove radiator inlet hose from radiato...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Chevrolet Malibu cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2006 Chevrolet Malibu Maxx LTZ 3.5 V6 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from engine using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from engine and from vehicle.
- Reverse procedure to install.
...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Chevrolet Malibu cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2006 Chevrolet Malibu Maxx LT 3.5 V6 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from engine using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from engine and from vehicle.
- Reverse procedure to install.
...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2006 Chevrolet Malibu LS 2.2 L4 GAS
- Drain engine coolant.
- Remove lefthand headlamp assembly mounting bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect connector and remove headlamp.
- Remove righthand headlamp assembly mounting bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect connector and remove headlamp.
- Loop suitable rope around upper two tabs of condenser and tie rope around upper engine compartment tie bar.
- Remove upper radiator support bracket bolts and support brackets.
- Remove surge tank outlet hose from radiator.
- Remove radiator inlet hose from radiato...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Chevrolet Malibu vehicle.
|
| Access the Complete guide! |
