Auto Parts Search
We have info for following modifications of 2006 Chevrolet Uplander
- 2006 Chevrolet Uplander LT 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:L
- 2006 Chevrolet Uplander LT 3.9 V6 GAS, CC:3880, CID:237, Fuel Injection, Aspiration:237, Engine VIN:, Desg:1
- 2006 Chevrolet Uplander LS 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:L
- 2006 Chevrolet Uplander 3.5 V6 GAS, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:L
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Uplander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Uplander cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2006 Chevrolet Uplander LT 3.9 V6 GAS
- Raise and support vehicle using a suitable lift.
- Reference mark propeller shaft at transfer case flange.
- Remove propeller shaft-to-transfer case flange bolts.
- Reference mark propeller shaft at torque tube flange.
- Remove propeller shaft-to-torque tube flange bol...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Uplander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Uplander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Uplander cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Chevrolet Uplander 3.5 V6 GAS
Front
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove engine splash shield.
- Insert a suitable drift or punch through brake caliper and into brake rotor to prevent wheel hub and bearing from turning.
- Remove wheel drive shaft spindle nut.
- Remove stabilizer shaft link.
- Disconnect outer tie rod end from steering knuckle. Do not loosen tie rod end jam nut.
- Disconnect wheel speed sensor electrical connector, then reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129, or equival...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Uplander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Uplander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Uplander cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Chevrolet Uplander LT 3.9 V6 GAS
Front
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove engine splash shield.
- Insert a suitable drift or punch through brake caliper and into brake rotor to prevent wheel hub and bearing from turning.
- Remove wheel drive shaft spindle nut.
- Remove stabilizer shaft link.
- Disconnect outer tie rod end from steering knuckle. Do not loosen tie rod end jam nut.
- Disconnect wheel speed sensor electrical connector, then reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129, or equival...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Uplander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Uplander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Uplander cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Chevrolet Uplander LS 3.5 V6 GAS
Front
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove engine splash shield.
- Insert a suitable drift or punch through brake caliper and into brake rotor to prevent wheel hub and bearing from turning.
- Remove wheel drive shaft spindle nut.
- Remove stabilizer shaft link.
- Disconnect outer tie rod end from steering knuckle. Do not loosen tie rod end jam nut.
- Disconnect wheel speed sensor electrical connector, then reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129, or equival...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Uplander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Uplander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Uplander cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2006 Chevrolet Uplander LT 3.5 V6 GAS
- Raise and support vehicle using a suitable lift.
- Reference mark propeller shaft at transfer case flange.
- Remove propeller shaft-to-transfer case flange bolts.
- Reference mark propeller shaft at torque tube flange.
- Remove propeller shaft-to-torque tube flange bol...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Uplander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Uplander AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Uplander cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2006 Chevrolet Uplander 3.5 V6 GAS
- Raise and support vehicle using a suitable lift.
- Reference mark propeller shaft at transfer case flange.
- Remove propeller shaft-to-transfer case flange bolts.
- Reference mark propeller shaft at torque tube flange.
- Remove propeller shaft-to-torque tube flange bol...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Uplander DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Chevrolet Uplander vehicle. |
Access the Complete guide! |