Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Ford Focus car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Ford Focus automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Ford Focus
- 2006 Ford Focus ZX3 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
- 2006 Ford Focus ZX5 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
- 2006 Ford Focus ZX4 ST 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2006 Ford Focus ZXW 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
- 2006 Ford Focus ZX4 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
BRAKE SERVICE PROCEDURES FOR 2006 Ford Focus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Focus cars and light trucks from 1990+.
Anti-Lock Brakes -> Focus -> Description -> ABS w/Traction Control & Stability Assist -> Brake Booster -> Electronic Brake Distribution (EBD) -> Hydraulic & Electronic Control Unit -> Lateral Accelerometer -> Stability Assist Module -> Steering Wheel Rotation Sensor -> Wheel Speed Sensors -> Yaw Rate Sensor
Vehicle: 2006 Ford Focus ZX3 2.0 L4 GAS
Hydraulic & Electronic Control Unit
The ABS control module and hydraulic unit are integrated into one assembly. The unit consists of an aluminum block of solenoid valves, pump motor and ABS control module.
The ABS control module continuously monitors and compares wheel speed information for each wheel. When the module determines that a wheel lockup is going to occur, brake pressure is modulated to the appropriate wheel. Brake pressure modulation is achieved by the hydraulic control unit opening and closing appropriate solenoid valves. When the affected wheel returns to normal speed, s...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Focus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Focus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Focus cars and light trucks from 1990+.
Power Brake Units -> Application Chart
Vehicle: 2006 Ford Focus ZX4 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Focus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Focus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Focus cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake System Bleed -> System Priming -> Wheel Bleeding Sequence
Vehicle: 2006 Ford Focus ZX4 ST 2.3 L4 GAS
Pressure bleeding is recommended for all hydraulic disc brake systems.
Do not reuse brake fluid drained from the hydraulic system when bleeding the brakes. Ensure disc brake pistons are returned to their normal positions and the shoe and lining assemblies are properly seated.
Do not shake the pressure bleeder tank while air is being added or after it has been pressurized. This will prevent air from the tank getting into the lines. Do not move the tank during the bleeding operation. The tank should be kept at least one third full.
On models equipped with power brakes, exhaust the...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Focus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Focus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Focus cars and light trucks from 1990+.
Anti-Lock Brakes -> Focus -> System Service -> 2004 -> 2005-07 -> ABS Control Module -> Accelerometer Sensor -> Brake System Bleed -> Component Replacement -> Front -> Hydraulic Control Unit (HCU) -> Installation -> Manual -> Module Configuration -> Pressure -> Rear -> Removal -> Steering Column -> Steering Wheel Rotation Sensor -> Wheel Speed Sensor -> Yaw Rate Sensor
Vehicle: 2006 Ford Focus ZX4 ST 2.3 L4 GAS
Brake System Bleed
Manual
The primary and secondary (front and rear) hydraulic brake systems are individual systems and are bled separately. Bleed longest tube first on individual system being serviced. During complete bleeding operation, do not allow the master cylinder reservoir to run dry. Never reuse brake fluid that has been drained from hydraulic system or has been allowed to stand in an open container for an extended period of time.
- To bleed brake system, position a suitable box wrench on bleeder fitting on brake wheel cylinder. Attach rubber drain hose to bleeder fitting.
- Sub...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Focus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Focus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Focus cars and light trucks from 1990+.
Power Brake Units -> Clutch System Bleed
Vehicle: 2006 Ford Focus ZX4 2.0 L4 GAS
- Attach a rubber drain hose to bleeder screw of clutch master cylinder, then submerge free end of hose in a container partially filled with clean brake fluid.
- Slowly pump clutch pedal to floor several times and hold it.
- With clutch pedal held to floor...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Focus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Focus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Focus cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Precautions -> System Depressurizing
Vehicle: 2006 Ford Focus ZX4 ST 2.3 L4 GAS
System Depressurizing
On models equipped with anti-lock brakes, hydraulic system must be depressurized prior to ...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Focus BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Ford Focus vehicle.
|
| Access the Complete guide! |
