Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Ford Ranger car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Ford Ranger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Ford Ranger
- 2006 Ford Ranger XL 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2006 Ford Ranger XL 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2006 Ford Ranger XL 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:D
- 2006 Ford Ranger XLT 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2006 Ford Ranger XLT 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2006 Ford Ranger XLT 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:D
- 2006 Ford Ranger FX4 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2006 Ford Ranger STX 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2006 Ford Ranger STX 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2006 Ford Ranger Sport 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2006 Ford Ranger Sport 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
BRAKE SERVICE PROCEDURES FOR 2006 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Ranger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing
Vehicle: 2006 Ford Ranger XL 2.3 L4 GAS
Refer to Figs. and f...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Ranger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Power Brake Unit Service
Vehicle: 2006 Ford Ranger XLT 3.0 V6 GAS
The Hydro-Boost and Hydro-Max power brake booster...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Ranger cars and light trucks from 1990+.
Drum Brakes -> Expedition, Explorer, E-Series, F-Series, Mountaineer, Navigator & Ranger -> Adjustments -> Drums Installed -> Drums Removed -> Expedition, Explorer, F-150, F-250, Mountaineer & Navigator -> Parking Brake Except Rear Disc -> Parking Brake w/Rear Disc -> Service Brake
Vehicle: 2006 Ford Ranger STX 3.0 V6 GAS
Service Brake
The rear brake shoes adjust automatically when the vehicle is driven in reverse and the brakes are applied sharply several times. Manual adjustment is required only when brake shoes are replaced. When adjusting rear brakes, ensure parking brake is properly adjusted and adjuster is operating freely.
Drums Removed
- With drums removed, clean areas where shoes contact backing plate, then apply suitable lubricant to contact areas. Ensure lubricant does not contaminate linings.
- Adjust gauge to inside diameter of brake drum using suitable brake shoe adjusting gauge.
- Reverse tool an...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Ranger cars and light trucks from 1990+.
Drum Brakes -> Expedition, Explorer, E-Series, F-Series, Mountaineer, Navigator & Ranger -> Brake Service -> Heavy Duty -> Installation -> Removal -> Standard Duty
Vehicle: 2006 Ford Ranger XLT 3.0 V6 GAS
Drum brakes are available in standard versions or in heavy duty versions. Refer to Figs. and for component locations when performing the following procedures.
Removal
Standard Duty
- Raise and support vehicle, remove rear wheel and tire assemblies.
- Remove and discard spring nut.
- If brake drum is rusted to axle shaft pilot diameter, tap center of brake drum between wheel studs.
- Pull brake drum off of axle.
- If brake drums will not come off, sing a screwdriver, move brake shoe adjusting lever off of brake adjusting screw, then loosen brake adjuster to allow drum to release.
- Remove long brake...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Ranger cars and light trucks from 1990+.
Power Brake Units -> Bendix Vacuum Brake Booster -> Brake Booster, Replace -> Aviator -> E-Series, Expedition, Explorer, Explorer Sport & Sport/Trac, F-150, Mark LT, Mountaineer & Navigator -> Escape & Mariner -> Excursion & F-Super Duty -> Freestar & Monterey -> Ranger
Vehicle: 2006 Ford Ranger XLT 4.0 V6 GAS
Aviator
Refer to Fig. and remove components in sequence illustrated. Use new nuts when installing brake booster.
Excursion & F-Super Duty
- Remove air cleaner housing, if required.
- Remove brake master cylinder attaching nuts.
- Position brake master cylinder aside.
- Disconnect booster vacuum hose.
- Disconnect power distribution box auxiliary relay and set aside.
- Remove fuse panel cover.
- Remove brake pedal position switch self-locking pin.
- Remove brake pedal position switch and brake booster pushrod from brake pedal pin.
- Remove power brake booster nuts.
- Remove power brake booster.
- Reverse p...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Ford Ranger cars and light trucks from 1990+.
Anti-Lock Brakes -> Ranger -> Description -> System Operation
Vehicle: 2006 Ford Ranger XLT 4.0 V6 GAS
System Operation
The four wheel Anti-Lock Brake System (ABS) prevents wheel lockup by automatically modulating the brake pressure during an emergency stop.
When the brakes are applied, fluid is forced from the master cylinder outlet ports to the Hydraulic Control Unit (HCU) inlet ports. This pressure is transmitted through three normally open solenoid valves contained inside the HC...
CLICK HERE TO GET FULL ACCESS TO 2006 Ford Ranger BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
