Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 GMC Canyon car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 GMC Canyon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 GMC Canyon
- 2006 GMC Canyon SLE 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2006 GMC Canyon SLE 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2006 GMC Canyon SL 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2006 GMC Canyon SLT 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2006 GMC Canyon WT 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2006 GMC Canyon WT 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 GMC Canyon AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 GMC Canyon cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 GMC Canyon SLE 3.5 L5 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove sta...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Canyon STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 GMC Canyon AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 GMC Canyon cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 GMC Canyon WT 3.5 L5 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Raise and support vehicle, then remove left front wheel and tire assembly.
- Remove left wheelhouse liner.
- Disengage air conditioning compressor electrical connector from bracket.
- Remove lower air conditioning compressor mounting bolts, leave upper mounting bolt with air conditioning compressor.
- Lower vehicle.
- Remove alternator output battery t...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Canyon STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 GMC Canyon AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 GMC Canyon cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 GMC Canyon WT 2.8 L4 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove st...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Canyon STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 GMC Canyon AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 GMC Canyon cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 GMC Canyon SL 2.8 L4 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove st...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Canyon STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 GMC Canyon AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 GMC Canyon cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 GMC Canyon SLT 3.5 L5 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove sta...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Canyon STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 GMC Canyon AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 GMC Canyon cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 GMC Canyon SLE 2.8 L4 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove st...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Canyon STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
